Tag: M.W:200-300

Adding a certain compound to certain chemical reactions, such as: 32779-37-6, 2,5-Dibromopyrimidine, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound, 32779-37-6, blongs to pyrimidines compound. Formula: C4H2Br2N2

General procedure: In a dry sealed tube under argon were placed, to a solution of 1-Boc-piperazine (5.04 mmol), potassium carbonate (13.1 mmol) in acetonitrile (12.6 mL) was added 2,5-dibromo pyrimidine13(5.04 mmol). The mixture was allowed to stir at 80 C for 12 h. After completion of the reaction (monitored by TLC), the mixture was then cooled at room temperature, then it was quenched with saturated aqueous NH4Cl (10 mL) and extracted with EtOAc. The organic layers were dried over anhydrous MgSO4and concentrated in vacuo. The resulting residue was purified by flash column chromatography on silica gel (EtOAc:n-hexane = 1:8) to afford piperazine11a. tert-Butyl 4-(5-bromopyrimidin-2-yl)piperazine-1-carboxylate(11a): Yield: 88%;1H-NMR (400 MHz, CDCl3)delta8.30 (s,J= 2.0 Hz, 2H), 3.78-3.75 (t,J= 5.2 Hz, 4H), 3.49-3.47 (t,J= 5.2 Hz, 4H), 1.48 (s, 9H).13C-NMR (100 MHz, CD3OD)delta161.2, 159.2, 156.46, 107.15, 81.5, 44.8, 28.6.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,32779-37-6, its application will become more common.

Reference:
Article; Kim, Juhyeon; Kim, Yoon Jung; Londhe, Ashwini M.; Pae, Ae Nim; Choo, Hyunah; Kim, Hak Joong; Min, Sun-Joon; Molecules; vol. 24; 18; (2019);,
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Adding a certain compound to certain chemical reactions, such as: 83410-16-6, 4-Chloro-5-iodo-2,6-dimethylpyrimidine, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound, Safety of 4-Chloro-5-iodo-2,6-dimethylpyrimidine, blongs to pyrimidines compound. Safety of 4-Chloro-5-iodo-2,6-dimethylpyrimidine

Step C: A mixture of 3-ethynyl-7-fluoro-2H-chromen-2-one (376 mg, 2.0 mmol), 4-chloro-5-iodo-2,6-dimethylpyrimidine (590 mg, 2.2 mmol), copper(I) iodide (19 mg, 0.1 mmol), bis(triphenylphosphine)palladium(II) dichloride (70 mg, 0.1 mmol), triethylamine (404 mg, 4.0 mmol) and CH3CN (4.0 mL) was stirred at 50 C. under an Argon atmosphere overnight, then the solvent was removed under reduced pressure. The residue was purified by silica gel column chromatography (5% MeOH in CH2Cl2) to give 3-((4-chloro-2,6-dimethylpyrimidin-5-yl)ethynyl)-7-fluoro-2H-chromen-2-one (92 mg, 14%). MS m/z 329.3 [M+H]+.

At the same time, in my other blogs, there are other synthetic methods of this type of compound,83410-16-6, 4-Chloro-5-iodo-2,6-dimethylpyrimidine, and friends who are interested can also refer to it.

Reference:
Patent; PTC Therapeutics, Inc.; F. Hoffmann-La Roche AG; Woll, Matthew G.; Chen, Guangming; Choi, Soongyu; Dakka, Amal; Huang, Song; Karp, Gary Mitchell; Lee, Chang-Sun; Li, Chunshi; Narasimhan, Jana; Naryshkin, Nikolai; Paushkin, Sergey; Qi, Hongyan; Turpoff, Anthony A.; Weetall, Marla L.; Welch, Ellen; Yang, Tianle; Zhang, Nanjing; Zhang, Xiaoyan; Zhao, Xin; Pinard, Emmanuel; Ratni, Hasane; (317 pag.)US9617268; (2017); B2;,
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Application of 1445-39-2, Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials. 1445-39-2, name is 2-Amino-5-iodopyrimidine. A new synthetic method of this compound is introduced below.

b) N-(3-((2-aminopyrimidin-5-yl)ethynyl)-2,4-difluorophenyl)-5-chloro-2-methoxypyridine-3-sulfonamide acetate A mixture of 5-chloro-N-(3-ethynyl-2,4-difluorophenyl)-2-methoxypyridine-3-sulfonamide (1.24 g), 5-iodopyrimidin-2-amine (1.15 g), dichlorobis(tricyclohexylphosphine)palladium(II) (170 mg), cesium carbonate (4.51 g) and DMSO (16.5 mL) was stirred under a nitrogen atmosphere at 120 C. for 3 hr. After cooling to room temperature, the mixture was diluted with water/saturated brine and extracted three times with ethyl acetate. The obtained organic layer was washed with saturated brine, dried over magnesium sulfate and concentrated to give a residue. The residue was purified by silica gel column chromatography (ethyl acetate/hexane) to give the title compound as a crude purified product in a free form. The obtained title compound as a crude purified product in a free form was dissolved in DMF/toluene and subjected to silica gel column chromatography (NH, methanol/ethyl acetate) to elute a byproduct. Silica gel supporting a free form of the title compound was added to ethyl acetate (100 mL), acetic acid (18 mL) and water (100 mL), and the mixture was stirred at room temperature for 10 min. The mixture was filtered and silica gel on the filter was treated 4 times with ethyl acetate/acetic acid (30 mL/6 mL) to elute the object product. The organic layer was collected from the filtrate, and the organic layer was washed with water and saturated brine, dried over magnesium sulfate and concentrated to give a residue. The residue was dissolved in an ethyl acetate/THF/saturated aqueous sodium hydrogen carbonate solution, and the obtained organic layer was washed with a saturated aqueous sodium hydrogen carbonate solution and saturated brine, dried over magnesium sulfate and concentrated to give a residue. The residue was purified by silica gel column chromatography (ethyl acetate/hexane) and washed with ethyl acetate to give the title compound as a crude purified product in a free form. The same reaction was performed at 4.05-fold amount and 4.12-fold amount. The obtained title compounds as crude purified products in a free form were collected, acetic acid (24.8 mL) was added and the mixture was heated to 50 C. To the mixture was added DMSO (66 mL) at 50 C. and dissolved therein. The mixture was filtered, and a trace amount of an insoluble material on the filter was washed with acetic acid (24.8 mL). The filtrate was heated to 50 C. and water (50 mL) was added dropwise. The mixture was cooled to room temperature over 30 min. The precipitate was collected by filtration, washed three times with ethanol/water (1/10, 33 mL) and dried at 50 C. under reduced pressure to give the title compound (5.53 g). 1H NMR (300 MHz, DMSO-d6) delta 1.91 (3H, s), 3.94 (3H, s), 7.14-7.37 (4H, m), 8.07 (1H, d, J=2.6 Hz), 8.43 (2H, s), 8.52 (1H, d, J=2.6 Hz), 10.46 (1H, s), 11.94 (1H, s).

At the same time, in my other blogs, there are other synthetic methods of this type of compound,1445-39-2, 2-Amino-5-iodopyrimidine, and friends who are interested can also refer to it.

Reference:
Patent; Takeda Pharmaceutical Company Limited; FUJIMOTO, Jun; LIU, Xin; KURASAWA, Osamu; TAKAGI, Terufumi; CARY, Douglas Robert; BANNO, Hiroshi; ASANO, Yasutomi; KOJIMA, Takuto; (159 pag.)US2019/169166; (2019); A1;,
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Reference of 696-07-1, The major producers of chemicals have been the Europe, Japan and China. Due to the growing call for a cleaner, greener environment, people will have to find innovative ways to maintain their relevance. Here is a compound 696-07-1, name is 5-Iodouracil. This compound has unique chemical properties. The synthetic route is as follows.

A. Preparation of 5-iodo-2,4-dioxo-3,4-dihydro-2H-pyrimidine-l-carboxylic acid tert-butyl ester; A 500 ml single neck round bottom flask was charged with 5-iodouracil (5.0g, 21mmol) and dry acetonitrile (200ml). Dimethyl amino pyridine (26mg, 0.21mmol) was added in one portion followed by drop wise addition of di-t-butyl di carbonate (5.5g, 25.2mmol) at room temperature and stirred for 3h at room temperature. The reaction mixture was filtered and the organic layer was concentrated under vacuum. Yield = 7.1 (100%)The proton NMR data of the desired product, 5-iodo-2,4-dioxo-3,4-dihydro-2H- pyrimidine-1 -carboxylic acid tert-butyl ester, is provided below: 1H NMR (400 MHz, DMSO-d6, deltappm):CH3)

According to the analysis of related databases, 696-07-1, the application of this compound in the production field has become more and more popular.

Reference:
Patent; JUBILANT BIOSYS LIMITED; WO2007/122634; (2007); A2;,
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials. 151266-23-8, name is 3-Iodo-1H-pyrazolo[3,4-d]pyrimidin-4-amine. A new synthetic method of this compound is introduced below., Recommanded Product: 3-Iodo-1H-pyrazolo[3,4-d]pyrimidin-4-amine

87D: Compound 87C (200 mg, 0.77 mmol), ,P0 (488 mg, 2.30 mmol), 4-phenoxybenzene boronic acid (491 mg, 2.32 mmol) and Tetrakis-(triphenylphosphine)palladium (124 mg, 0.1 1 mmol) were dissolved in 2.5 mL of dioxane in a microwave vial. The vial was sealed and the reaction mixture was heated to 180C for 10 min under microwave irradiation. The reaction mixture was partitioned between water and ethylacetate and the organic layer was separated, dried over anhydrous Na2S04, filtered and concentrated. The residue was purified by column chromatography on Si02 using MeOH/CH2C12 (0: 100 to 10:90). Compound 87D was obtained as a white powder (92 mg, 41% yield). NMR (ppm, DMSO): 8.21 (s, 1 H), 7.66 (d, J= 8.8 Hz, 2H), 7.43 (t, J= 7.9 Hz, 2H), 7.21-7.1 1 (m, 5H). LCMS (+esi): 304.2 (M+H+).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 151266-23-8, 3-Iodo-1H-pyrazolo[3,4-d]pyrimidin-4-amine.

Reference:
Patent; THE WALTER AND ELIZA HALL INSTITUTE OF MEDICAL RESEARCH; LUDWIG INSTITUTE FOR CANCER RESEARCH LIMITED; LESSENE, Guillaume Laurent; BAELL, Jonathan Bayldon; BURGESS, Antony Wilks; MARUTA, Hiroshi; WO2012/3544; (2012); A1;,
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Application of 479691-42-4 ,Some common heterocyclic compound, 479691-42-4, molecular formula is C13H19ClN4O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

Preparation of compound 38: A solution of compound 37 in 20 ml of ether/HCl was allowed to stir at room temperature under nitrogen atmosphere for 1 h. The excess solvent was distilled off under reduced pressure and the crude material was washed with n-pentane and dried to yield 180 mg of compound 38 in quantitative yield.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,479691-42-4, its application will become more common.

Reference:
Patent; Salituro, Francesco G.; Saunders, Jeffrey O.; Yan, Shunqi; US2010/331307; (2010); A1;,
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Related Products of 633328-95-7, With the rapid development and complex challenges of chemical substances, the synthesis of new drugs is usually one of the most effective ways to increase yield.633328-95-7, name is 5-Bromo-2-chloro-4-methylpyrimidine, molecular formula is C5H4BrClN2, molecular weight is 207.46, as common compound, the synthetic route is as follows.

To a stirred solution of (2-methyl-[l,l*-biphenyl]-3-yl)methanol (7.1 g, 0.036 mol) in DMF (60 mL) at 0C, sodium hydride (1.73 g, 60% in minerali oil, 0.043 mol) was added and stirred at room temperature for 30 minutes. To this mixture, 5- bromo-2-chloro-4-methylpyrimidine (5 g, 0.024 mol) was added and allowed to stir at room temperature for 16h. After completion of the reaction, the reaction mixture was diluted with water (50 mL) and extracted with ethyl acetate (2 x 100 mL). The combined organic layer was then dried over sodium sulfate, filtered and evaporated to give crude product. The crude product was purified on column chromatography (silicagel, 100-200) using 10% ethyl acetate in hexane as eluent to afford 5-bromo-4- methyl-2-((2-methyl-[l, -biphenyl]-3-yl)methoxy)pyrimidine as off-white solid (Yield: 1.5 g, 17%). LCMS (ES) m/z = 369.01 [M+H]+; MR (400 MHz, CDC13): delta 2.31 (s, 3H), 2.58 (s, 3H), 5.47 (s, 2H), 7.21-7.23 (m, 2H), 7.25-7.30 (m, 2H), 7.35 (m, 1H), 7.39-7.43 (m, 2H), 7.49 (m, 1H), 8.47 (s, 1H). HPLC purity 214 nm, 99.78%.

Statistics shows that 633328-95-7 is playing an increasingly important role. we look forward to future research findings about 5-Bromo-2-chloro-4-methylpyrimidine.

Reference:
Patent; JUBILANT BIOSYS LIMITED; VENKATESHAPPA, Chandregowda; DURAISWAMY, Athisayamani Jeyaraj; PUTTA, Rama Kishore V P; RAJAGOPAL, Sridharan; (179 pag.)WO2019/87214; (2019); A1;,
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 696-07-1, name is 5-Iodouracil, the common compound, a new synthetic route is introduced below. COA of Formula: C4H3IN2O2

A suspension of 5-iodouracil (1.8g, 7.54mmol) in dry acetonitrile (15mL) was treated with N,O-bis(trimethylsilyl) acetamide (4.62mL, 18.87mmol) and left to stir until the solution became clear. A solution of a mixture of isoxazolidines 12, 13 (2.6g, 6.29mmol) in dry acetonitrile (15mL) and trimethylsilyl triflate (0.22mL, 1.25mmol) was then added, and the reaction mixture was stirred at room temperature overnight. After this time, the solution was carefully neutralized by the addition of 5% aqueous sodium hydrogen carbonate and then concentrated in vacuo. After addition of dichloromethane (20mL), the organic phase was separated, washed with water (2×10mL), dried with sodium sulfate, filtered, and concentrated. The 1H NMR spectrum of the crude reaction mixture showed the presence of beta-anomers (cis) as nearly exclusive adducts, whereas the alpha-anomers were present only in trace amounts. The residue was purified by MPLC on a silica gel column (cyclohexane/ethyl acetate, 7:3) to afford 14. Yellow oil, 3.65g, 90% yield. 1H NMR (500MHz, CDCl3): delta=8.90 (br s, 1H), 8.25 (s, 1H), 7.65 (dd, J=7.9, 1.4Hz, 4H), 7.49-7.37 (m, 6H), 6.01 (dd, J=7.5, 3.4Hz, 1H), 3.71 (dd, J=4.7, 2.0Hz, 2H), 2.96 (dt, J=13.7, 7.8Hz, 2H), 2.90-2.84 (m, 1H), 2.82 (s, 3H), 2.25-2.09 (m, 1H), 1.05 (s, 9H). 13C NMR (126MHz, CDCl3): delta=160.23, 150.15, 145.33, 135.69, 132.83, 130.10, 128.02, 83.84, 69.35, 67.65, 63.08, 44.85, 41.82, 26.95, 19.31. Anal. calcd for C25H30IN3O4Si: C, 50.76; H, 5.11; N, 7.10; found: C, 50.73; H, 5.12; N, 7.11.

The synthetic route of 696-07-1 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Romeo, Roberto; Giofre, Salvatore V.; Garozzo, Adriana; Bisignano, Benedetta; Corsaro, Antonino; Chiacchio, Maria A.; Bioorganic and Medicinal Chemistry; vol. 21; 18; (2013); p. 5688 – 5693;,
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Adding a certain compound to certain chemical reactions, such as: 50270-27-4, 2,4,6-Trichloropyrimidine-5-carbaldehyde, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound, 50270-27-4, blongs to pyrimidines compound. HPLC of Formula: C5HCl3N2O

To a solution of 2,4,6-trichloro-pyrimidine-5-carbaldehyde (2.5 g, 11.6 mmol) in EtOH (40 mL) cooled to -78 C was added N-benzyl-4-piperidinzyl-hydrazine dihydrochloride (3.3 g, 11.6 mmol) and TEA (5 mL). The mixture was stirred for 30 min at -78 C then 2 hr at 0 C. The solution was concentrated in vacuo without heating. To the reduced volume solution EtOAc and a sat NaHCO3 solution was added and the solution filtered over Celite.(TM). and separated. The organic layer was dried (MgSO4) and concentrated in vacuo without heating. Filtration over a small silica gel plug (EtOAc) and concentration afforded the desired product as a yellow solid (3 g).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,50270-27-4, its application will become more common.

Reference:
Patent; Wyeth; US2009/98086; (2009); A1;,
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Reference of 26032-72-4, With the rapid development and complex challenges of chemical substances, the synthesis of new drugs is usually one of the most effective ways to increase yield.26032-72-4, name is 2,4-Dichloro-6-phenylpyrimidine, molecular formula is C10H6Cl2N2, molecular weight is 225.074, as common compound, the synthetic route is as follows.

[00526] To a reaction flask were added 2,4-dichloro-6-phenylpyrimidine (0.76 g, 3.40 mmol), potassium carbonate (0.93 g, 6.80 mmol), (2S,3S)-ethyl 3-aminobicyclo[2.2.2]octane-2-carboxylate hydrochloride (0.96 g, 4.10 mmol) and DMF (10 mL). The mixture was stirred at 50 C for 24 h. Water (40 mL) was added to quench the reaction, and the resulting mixture was extracted with EtOAc (30 mL x 3). The combined organic phases were washed with saturated brine (60 mL), dried over anhydrous Na2 SO4, filtered, and the filtrate was concentrated in vacuo. The residue was purified by silica gel chromatograph (PE/EtOAc (v/v) = 15/1) to give the title compound as a white solid (0.70 g, 50 %).MS (ESI, pos. ion) m/z: 386.1[M+H]b.

Statistics shows that 26032-72-4 is playing an increasingly important role. we look forward to future research findings about 2,4-Dichloro-6-phenylpyrimidine.

Reference:
Patent; SUNSHINE LAKE PHARMA CO., LTD.; ZHANG, Yingjun; REN, Qingyun; TANG, Changhua; LIN, Xiaohong; YIN, Junjun; YI, Kai; (270 pag.)WO2017/97234; (2017); A1;,
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia