M.W=0-100 | Page 17 of 40

Research on new synthetic routes about 591-12-8

In addition to the literature in the link below, there is a lot of literature about this compound(5-Methylfuran-2(3H)-one)Related Products of 591-12-8, illustrating the importance and wide applicability of this compound(591-12-8).

Related Products of 591-12-8. The mechanism of aromatic electrophilic substitution of aromatic heterocycles is consistent with that of benzene. Compound: 5-Methylfuran-2(3H)-one, is researched, Molecular C5H6O2, CAS is 591-12-8, about Efficient synthesis of niobium pentoxide nanowires and application in ethanolysis of furfuryl alcohol. Author is Zhang, Zhenwei; Wang, Peng; Wu, Zeying; Yue, Chuanjun; Wei, Xuejiao; Zheng, Jiwei; Xiang, Mei; Liu, Baoliang.

Nb2O5 nanowires with high sp. surface area and crystallinity were prepared by using ammonium oxalate and an acetic acid solvent system. The nanomaterial was applied in ethanolysis of furfuryl alc. (FA), and the yield of the product, 2-(ethoxymethyl)furan (FEE), achieved was up to 79.6%. Compared to mesoporous Nb2O5 materials and other porous materials, the residence time of FEE on the surface of the catalyst is shorter, and the yield of Et levulinate (EL) is lower. Furthermore, a high temperature calcination treatment can change the acid sites and acidity type distribution on the nanowire surface. By XRD, NH3O5 -TPD, IR, and TG-DTA determination methods, it was found that the weak and medium-strong acid sites on the surface of Nb2O5 nanowires were reduced after a 300°C treatment, and the amount of strong acid was relatively higher. According to the catalytic performance test data and acidity determination, it was concluded that more weak acid and medium-strong acid sites improve the conversion of furfuryl alc. to FEE, and the strong acid sites promote further conversion of FEE to EL.

Reference:
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

New learning discoveries about 591-12-8

In addition to the literature in the link below, there is a lot of literature about this compound(5-Methylfuran-2(3H)-one)Name: 5-Methylfuran-2(3H)-one, illustrating the importance and wide applicability of this compound(591-12-8).

Name: 5-Methylfuran-2(3H)-one. The mechanism of aromatic electrophilic substitution of aromatic heterocycles is consistent with that of benzene. Compound: 5-Methylfuran-2(3H)-one, is researched, Molecular C5H6O2, CAS is 591-12-8, about Synthesis of water-soluble, fully biobased cellulose levulinate esters through the reaction of cellulose and alpha-angelica lactone in a DBU/CO2/DMSO solvent system. Author is Pei, Min; Peng, Xinwen; Shen, Yuqing; Yang, Yunlong; Guo, Yuanlong; Zheng, Qiang; Xie, Haibo; Sun, Hui.

Cellulose esters are important cellulose derivatives with good processing ability and material properties. The design and sustainable synthesis of cellulose esters are prime research topics. Herein, cellulose levulinate esters (CLEs) with degrees of substitution (DSs) ranging from 0.15 to 2.04 were simply prepared through an atom-economic reaction between cellulose dissolved in a newly developed 1.8-diazabicyclo[5.4.0]undec-7-ene/dimethyl sulfoxide/carbon dioxide solvent system and alpha-angelica lactone, a biomass-derived and com. available platform chem., without the addition of any external catalysts or condensation reagents. The optimized reaction conditions of 120°C, 0.5 h, and a 5/1 molar ratio of alpha-angelica lactone to the hydroxyl groups in cellulose resulted in CLEs with appropriate DSs and satisfactory material properties. The structures and thermal properties of the CLEs were characterized by NMR spectroscopy, Fourier transform IR spectroscopy, differential scanning calorimetry, and thermal gravimetric anal. to develop an in-depth understanding of the correlations among the chem. structures, thermal properties, and mech. properties. A study of solubility in conventional solvents indicated that the CLEs with appropriate DSs were soluble in water, providing a green processing strategy to prepare CLE films with tensile strengths of up to 72 MPa and elongation at break values of up to 26.7%. The morphologies of the films were characterized by SEM and at. force microscopy. The cytotoxicity of the water-soluble CLEs was also evaluated in vaginal epithelial cells (VK2/E6E7) to identify the potential of the CLEs for biomedical applications.

Reference:
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Awesome Chemistry Experiments For 591-12-8

In addition to the literature in the link below, there is a lot of literature about this compound(5-Methylfuran-2(3H)-one)Electric Literature of C5H6O2, illustrating the importance and wide applicability of this compound(591-12-8).

Electric Literature of C5H6O2. Aromatic compounds can be divided into two categories: single heterocycles and fused heterocycles. Compound: 5-Methylfuran-2(3H)-one, is researched, Molecular C5H6O2, CAS is 591-12-8, about Transfer Hydrogenation of Methyl and Ethyl Levulinate Promoted by a ZrO2 Catalyst: Comparison of Batch vs. Continuous Gas-Flow Conditions. Author is Tabanelli, Tommaso; Paone, Emilia; Blair Vasquez, Paola; Pietropaolo, Rosario; Cavani, Fabrizio; Mauriello, Francesco.

The catalytic conversion of Me and Et levulinates into γ-valerolactone (GVL) by using methanol, ethanol, and 2-propanol as the H-donor/solvent, promoted by the ZrO2 catalyst, is described as carried out under both batch and gas-flow conditions. Under batch conditions, 2-propanol was found to be the best H-donor mol., with Et levulinate giving the highest yield in GVL. The reactions occurring under continuous gas-flow conditions were found to be much more efficient, also showing excellent yields in GVL when EtOH was used as the reducing agent. These experiments clearly show that the ability to release hydrogen from the alc. H-donor/solvent is the main factor driving CTH processes, while the tendency to attack the esteric group is the key step in the formation of transesterification products.

Reference:
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

The Absolute Best Science Experiment for 591-12-8

Heterocyclic compounds can be divided into two categories: alicyclic heterocycles and aromatic heterocycles. Compounds whose heterocycles in the molecular skeleton cannot reflect aromaticity are called alicyclic heterocyclic compounds. Compound: 591-12-8, is researched, Molecular C5H6O2, about Hydrogenation of levulinic acid to valeric acid over platinum-tungsten catalysts supported on γ-Al2O3, the main research direction is hydrogenation levulinate valerate platinum tungsten catalyst supported alumina.Name: 5-Methylfuran-2(3H)-one.

To address the challenges associated with fossil fuel depletion, exploration of the sustainable energy resources is one of the most pursued research areas in this century. Valeric acid (VA) is considered as a valuable platform mol. for the production of biofuels and chem. intermediates. However, the production of VA from levulinic acid (LA) has become one of the most desirable reactions. The aim of this work was to investigate the amount of acidity, Pt loading and exptl. conditions for the hydrogenation of LA into VA operated at 0.1 MPa H2 pressure and to elucidate the relationship between the active sites and the catalytic performance. The Pt-WO3 catalysts supported on γ-Al2O3 were synthesized by a simple wet impregnation method with various Pt loadings from 0.5 to 3 wt% with constant 10 wt% of WO3 and calcination at 500 °C for 4 h under air. The catalysts were characterized by powder X-ray diffraction (XRD), SEM-energy dispersive X-ray spectroscopy (SEM-EDS), N2 adsorption-desorption, temperature programmed desorption of ammonia (NH3-TPD), pyridine Fourier transform IR spectroscopy (Pyr.FT-IR) and CO-chemisorption studies. Under optimized reaction conditions, the 2Pt-10WO3/γ-Al2O3 catalyst exhibited the highest selectivity to VA (58%) with 91% conversion of LA. This is due to the availability of a huge number of acidic and Pt active sites on the catalyst surface. In addition, the catalytic activity, reaction parameters and stability of the catalyst are demonstrated clearly.

Reference:
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

You Should Know Something about 591-12-8

There are many compounds similar to this compound(591-12-8)Reference of 5-Methylfuran-2(3H)-one. if you want to know more, you can check out my other articles. I hope it will help you，maybe you’ll find some useful information.

The three-dimensional configuration of the ester heterocycle is basically the same as that of the carbocycle. Compound: 5-Methylfuran-2(3H)-one(SMILESS: O=C1OC(C)=CC1,cas:591-12-8) is researched.Safety of 5-(hydroxymethyl)-2,4-dimethylpyridin-3-ol hydrochloride. The article 《Niobium based macromolecule preparation and its potential application in biomass derived levulinic acid esterification》 in relation to this compound, is published in Inorganic Chemistry Communications. Let’s take a look at the latest research on this compound (cas:591-12-8).

Niobium incorporated meso-tetra-(4-carboxyphenyl)-porphyrin (Nb-TCPP) was prepared for the first time and grafted through the axial position by the surface amine groups present on functionalized SBA-15 (SBA-AM). The synthesized TCPP ligand, Nb-TCPP complex, and the grafted Nb-TCPP-SBA-AM complex were thoroughly characterized by various anal. and spectroscopic techniques such as FTIR, UV-visible, DR UV-visible, CHN, 1H NMR, powder XRD, and N2 sorption studies. The catalytic activity of the homogeneous (Nb-TCPP) and the heterogenized (Nb-TCPP-SBA-AM) complex were explored for the esterification of levulinic acid. The studies revealed that Nb-TCPP and Nb-TCPP-SBA-AM showed comparatively good catalytic activity (74-80% conversion) for the esterification of levulinic acid using methanol under mild reaction conditions with the formation of Me levulinate and α-angelica lactone as the major products.

Reference:
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

The important role of 591-12-8

Reference of 5-Methylfuran-2(3H)-one. So far, in addition to halogen atoms, other non-metallic atoms can become part of the aromatic heterocycle, and the target ring system is still aromatic. Compound: 5-Methylfuran-2(3H)-one, is researched, Molecular C5H6O2, CAS is 591-12-8, about Continuous Hydrogenation of Ethyl Levulinate to 1,4-Pentanediol over 2.8Cu-3.5Fe/SBA-15 Catalyst at Low Loading: The Effect of Fe Doping.

Bimetallic Cu-Fe catalysts with low loading were prepared for hydrogenation of Et levulinate (EL) to 1,4-pentanediol (1,4-PDO). Among them, 2.8Cu-3.5Fe/SBA-15 (Cu/Fe molar ratio of 1:1.5) performed best, capable of converting EL to the key intermediate γ-valerolactone (GVL) at 140 °C with 97 % yield. It can also be used to hydrogenate GVL to 1,4-PDO with 92.6 % selectivity or convert EL to 1,4-PDO in one pot. The high activity of the catalyst at such a low loading was attributed to the highly dispersed metal species and the Fe doping effect. Various characterization methods indicated that Fe acted as both structural and electronic modifier to promote the chem. properties of the Cu species. Besides, the incorporation of Fe provided abundant Lewis acid sites and accelerated the reaction process. CuFeO2 was detected by energy-dispersive X-ray spectroscopy, XPS, and XRD. On the basis of a combination of characterization and reaction kinetics, synergistic catalysis by Cu0 and CuFeO2 is considered to be responsible for the excellent performance of the Cu-Fe catalysts.

Reference:
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

An update on the compound challenge: 591-12-8

Reference of 5-Methylfuran-2(3H)-one. Aromatic heterocyclic compounds can also be classified according to the number of heteroatoms contained in the heterocycle: single heteroatom, two heteroatoms, three heteroatoms and four heteroatoms. Compound: 5-Methylfuran-2(3H)-one, is researched, Molecular C5H6O2, CAS is 591-12-8, about Inhibitory activity of Co-microencapsulation of cell free supernatant from Lactobacillus plantarum with propolis extracts towards fish spoilage bacteria. Author is Kuley, Esmeray; Kuscu, Metanet Muhammet; Durmus, Mustafa; Ucar, Yilmaz.

Antibacterial properties of microencapsulated Lactobacillus plantarum cell-free supernatant (CFS) in combinations with aqueous or ethanolic propolis extract at doses of 1% against fish spoilage bacteria were investigated. Microencapsulated samples contained more than 17 compounds, of which furyl alc., acetic acid, maltol, and 2(5H) furanon were identified as common compounds The effects of microencapsulated CFS from L. plantarum in combination with or without propolis extracts on the fish spoilage bacteria varied according to the bacterial species. Among the fish spoilage bacteria, the highest antimicrobial activity of samples was observed against P. damselae with >15.5 mm inhibition diameter zone. Pure and microencapsulated CFS from L. plantarum showed the lowest antimicrobial effects on P. mirabilis with a corresponding inhibition diameter zone of 8.33 and 8.00 mm. Microencapsulated CFS from L. plantarum in combination with aqueous propolis extract had 25 mg/mL of MIC and 50 mg/mL of MBC on all bacteria although the bactericidal effect of microencapsulated samples in combination with ethanolic propolis extract occurred at a level of above 50 mg/mL. The study results revealed that co-microencapsulation of CFS obtained from L. plantarum with propolis extract, especially its aqueous extract, could be potentially used as antimicrobial agents to overcome microbial growth in foods.

Reference:
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Our Top Choice Compound: 591-12-8

There are many compounds similar to this compound(591-12-8)Recommanded Product: 591-12-8. if you want to know more, you can check out my other articles. I hope it will help you，maybe you’ll find some useful information.

Most of the compounds have physiologically active properties, and their biological properties are often attributed to the heteroatoms contained in their molecules, and most of these heteroatoms also appear in cyclic structures. A Journal, Applied Catalysis, A: General called Vapor-phase hydrogenation of levulinic acid to γ-valerolactone over Cu-Ni alloy catalysts, Author is Yanase, Daichi; Hara, Takayoshi; Sato, Fumiya; Yamada, Yasuhiro; Sato, Satoshi, which mentions a compound: 591-12-8, SMILESS is O=C1OC(C)=CC1, Molecular C5H6O2, Recommanded Product: 591-12-8.

Vapor-phase hydrogenation of levulinic acid (LA) to γ-valerolactone (GVL) was investigated over supported-type Cu-Ni/Al2O3 catalysts in H2 flow at 250°C. Ni-rich Cu-Ni/Al2O3 catalysts, typically 6 weight% Cu and 14 weight% Ni, achieved high LA conversion with high stability and high GVL selectivity. XRD analyses of the catalysts clarified that Cu-Ni alloy nanoparticles were produced on the alumina support by forming a solid solution of CuO-NiO. The Cu-Ni/Al2O3 catalyst showed the highest GVL productivity of 11.0 kg kg-1cat h-1 with a selectivity of 98.6%, although the catalyst was gradually deactivated with time on stream under high space velocity conditions. In the characterization of the used catalysts, the catalyst deactivation would be caused by the sintering of active Cu-Ni alloy nanoparticles, which could be induced by the cycle of the oxidation with H2O and the reduction with H2.

Reference:
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

What kind of challenge would you like to see in a future of compound: 591-12-8

There are many compounds similar to this compound(591-12-8)Name: 5-Methylfuran-2(3H)-one. if you want to know more, you can check out my other articles. I hope it will help you，maybe you’ll find some useful information.

The three-dimensional configuration of the ester heterocycle is basically the same as that of the carbocycle. Compound: 5-Methylfuran-2(3H)-one(SMILESS: O=C1OC(C)=CC1,cas:591-12-8) is researched.Recommanded Product: 591-12-8. The article 《Efficient formation of γ-valerolactone in the vapor-phase hydrogenation of levulinic acid over Cu-Co/alumina catalyst》 in relation to this compound, is published in Catalysis Communications. Let’s take a look at the latest research on this compound (cas:591-12-8).

Vapor-phase hydrogenation of levulinic acid (LA) to γ-valerolactone (GVL) was investigated over Al2O3-supported bimetallic Cu-Co catalysts with different Cu/Co weight ratios under ambient H2 pressure. The bimetallic Cu-Co/Al2O3 catalyst with a Cu/Co weight ratio of 8/12 exhibits an excellent catalytic activity and stability: it showed a high GVL productivity of 5.46 kg kg-1cat. h-1 with a GVL selectivity higher than 99% at 250°C for 24 h. In the characterization of the catalysts, powder X-ray diffraction suggests that bimetallic Cu-Co particles on the Cu-Co/Al2O3 catalysts are composed of an alloy.

Reference:
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

New learning discoveries about 591-12-8

There are many compounds similar to this compound(591-12-8)Recommanded Product: 5-Methylfuran-2(3H)-one. if you want to know more, you can check out my other articles. I hope it will help you，maybe you’ll find some useful information.

The preparation of ester heterocycles mostly uses heteroatoms as nucleophilic sites, which are achieved by intramolecular substitution or addition reactions. Compound: 5-Methylfuran-2(3H)-one( cas:591-12-8 ) is researched.Recommanded Product: 5-Methylfuran-2(3H)-one.Dai, Zhen-Yao; Wang, Pu-Sheng; Gong, Liu-Zhu published the article 《Access to chiral γ-butenolides via palladium-catalyzed asymmetric allylic C-H alkylation of 1,4-dienes》 about this compound( cas:591-12-8 ) in Chemical Communications (Cambridge, United Kingdom). Keywords: gamma butenolide preparation; pentadiene alpha angelica lactone allylic alkylation palladium catalyst. Let’s learn more about this compound (cas:591-12-8).

Allylic C-H alkylation of 1,4-pentadienes with α-angelica lactones has been developed by tri-axial phosphoramidite-palladium catalysis. This reaction can tolerate a range of functional groups under mild conditions, furnishing versatile chiral γ,γ-disubstituted butenolides I (R = Me, i-Pr, Cy, etc.; Ar = C6H5, 4-MeC6H4, 4-FC6H4, etc.) in high yields with good to high levels of stereoselectivity.

Reference:
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia