Category: pyrimidines

Adding a certain compound to certain chemical reactions, such as: 62802-42-0, 2-Chloro-5-fluoropyrimidine, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound, 62802-42-0, blongs to pyrimidines compound. COA of Formula: C4H2ClFN2

General procedure: Under nitrogen, a solution of sodium carbonate (4.24g, 40 mmol) in water (20 mL) was added to asolution of 2-chloro-5-fluoropyrimidine 4 (2.47 mL, 20 mmol) in toluene (60 mL), and the mixture washeated to 80 C. Bis(triphenylphosphine)palladium(II) chloride (701.9 mg, 1 mmol) was added, and asolution of 3-(hydroxymethyl)phenylboronic acid (3.34 g, 22 mmol) in ethanol (20 mL) wassubsequently added dropwise. The reaction mixture was stirred at 90 C for 12 hours. The reactionmixture was cooled to room temperature and filtered. The aqueous phase was extracted with AcOEt(100 mL x 3). The combined organic layer was washed with H2O (30 mL) and brine (20 mL), and thendried over anhydrous Na2SO4, filtered and evaporated in vacuo. The residue was purified by flashchromatography over silica gel (petroleum/EtOAc = 10:13:1) to give(3-(5-fluoropyrimidin-2-yl)phenyl)methanol 5 (68%).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,62802-42-0, its application will become more common.

Reference:
Article; Zhang, Niu-niu; An, Bai-jiao; Zhou, Yan; Li, Xing-shu; Yan, Ming; Molecules; vol. 24; 6; (2019);,
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

The major producers of chemicals have been the Europe, Japan and China. Due to the growing call for a cleaner, greener environment, people will have to find innovative ways to maintain their relevance. Here is a compound 54326-16-8, name is 5-Chloropyrimidin-2(1H)-one. This compound has unique chemical properties. The synthetic route is as follows. Recommanded Product: 5-Chloropyrimidin-2(1H)-one

EXAMPLE 3 1(4-Chlorophenylsulfinyl)methyl-5-chloropyrimidin-2-one Potassium tert-butoxide (4 mmol) in DMF (10 ml) was added to a solution of 5-chloropyrimidin-2-one (4 mmol) in DMF (40 ml). The mixture was stirred at room temperature for 10 min before 1-bromomethyl-sulfinyl-4-chlorobenzene (see Preparation 5) (4 mmol) was added. The resultant mixture was stirred at 60 C. for 2 days, the solvent distilled off at reduced pressure, the residue triturated with water, the insoluble material dried and washed with a little chloroform before recrystallization from DMSO; the crystalline material was also washed with a little methanol and finally with water; yield 0.30 g (25%), m.p. 262 C. (Found: C43.63; H2.68. Calc. for C11 H8 Cl2 N2 O2S: C43.59; H2.67) 1 H NMR (DMSO-d6); delta 5.12 (CH2), 7.60 (Ph, b.s.), 8.19 and 8.62 (H-4, H-6, d, J 4 Hz). IR (KBr): 1660 (CO), 1060 cm–1 (SO). MS (70 eV; m/e (rel. int. %): 302 (0.5, M), 159 (6), 145 (33), 143 (100).

With the rapid development of chemical substances, we look forward to future research findings about 54326-16-8.

Reference:
Patent; Nyegaard & Co. A.S.; US4596870; (1986); A;,
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Synthetic Route of 65996-50-1, With the rapid development and complex challenges of chemical substances, the synthesis of new drugs is usually one of the most effective ways to increase yield.65996-50-1, name is 1H-Pyrrolo[3,2-d]pyrimidine-2,4(3H,5H)-dione, molecular formula is C6H5N3O2, molecular weight is 151.12, as common compound, the synthetic route is as follows.

5.1.1.2 2,4-Dichloropyrrolo[3,2-d]pyrimidine (1) To pyrrolo[3,2-d]pyrimidin-2,4-dione 5 (2.00 g, 13.2 mmol), 1 N NaOH (15 mL), and 0.60 g NaOH in 15 mL H2O was added and the mixture stirred at 40 C until a clear solution was obtained. The solution was cooled to room temperature (21-25 C) and then placed in an ice bath to obtain thick slurry. The slurry was then filtered to obtain a pale yellow solid. The solid was dissolved in 1 N NaOH (15 mL), and heated to 40 C to obtain a clear solution that upon cooling provided white crystals. The crystals were washed with MeOH (20 mL) and acetone (20 mL), and then dried under vacuum. The dry solids were taken in phenylphosphonic dichloride (10 mL) and heated to 170-175 C for 5 h during which the reaction mixture became a brown-black solution. After 5 h the hot reaction mixture was poured onto ice, extracted with EtOAc (200 mL) and the organic layer washed with satd NaHCO3 solution (3* 100 mL) till all effervescence subsided. The organic layer was then washed with brine and dried over MgSO4. The organic layer was concentrated in vacuo and loaded onto silica. The product was purified using column chromatography eluting with 9:1 then 3:1 hexanes/EtOAc to obtain 1 as an off-white solid (1.50 g, 7.9 mmol, 60%). Rf 0.5 in 3:1 hexanes/EtOAc. Mp 228.3-232.0 C. 1H NMR (400 MHz, DMSO-d6): delta 6.71 (d, 1H, J = 3.2 Hz), 8.09 (d, 1H, J = 2.8 Hz), 12.75 (s, 1H, NH). 13C NMR (100 MHz, DMSO-d6): delta 103.2, 124.3, 138.0, 143.5, 149.6, 153.9. ESI-MS m/z for C6H3Cl2N3 calculated [M+H]+ 187.9776, found 187.9777.

Statistics shows that 65996-50-1 is playing an increasingly important role. we look forward to future research findings about 1H-Pyrrolo[3,2-d]pyrimidine-2,4(3H,5H)-dione.

Reference:
Article; Temburnikar, Kartik W.; Ross, Christina R.; Wilson, Gerald M.; Balzarini, Jan; Cawrse, Brian M.; Seley-Radtke, Katherine L.; Bioorganic and Medicinal Chemistry; vol. 23; 15; (2015); p. 4354 – 4363;,
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Adding a certain compound to certain chemical reactions, such as: 33581-98-5, 4-(Hydroxymethyl)pyrimidine, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound, Application In Synthesis of 4-(Hydroxymethyl)pyrimidine, blongs to pyrimidines compound. Application In Synthesis of 4-(Hydroxymethyl)pyrimidine

To a mixture of 5-[4-(trifluoromethoxy)phenyl]-3H-l,3-benzoxazol-2-one (100 mg, 0.34 mmol), pyrimidin-4-ylmethanol (111.9 mg, 1.02 mmol) and PPh3 (177.7 mg, 0.68 mmol) in THF (6 mL) was added the DIAD (136.99 mg, 0.68 mmol) at 0 C and the mixture was stirred under N2 at 20 C for 16 hours. The mixture was concentrated to dryness, diluted with H20 (10 mL), and the mixture was extracted with EtOAc (10 mL x 2). The combined organic phase was washed with brine (10 mL), dried over Na2SC>4, filtered and the filtrate was concentrated to give the crude product. The crude product was purified by flash chromatography on silica gel (EtOAc in PE = 0% to 30% to 40% to 55%) to give the product (62.94 mg, 160.4 muiotaetaomicron, 47% yield) as colorless oil. 1H NMR OMSO-d6 400MHz deltaH = 9.09 (s, 1H), 8.79 (d, 1H), 7.74 (d, 2H), 7.63 – 7.59 (m, 2H), 7.51 – 7.41 (m, 4H), 5.30 (s, 2H). LCMS Rt = 1.27 min in 2 min chromatography, MS ESI calcd. for C19H13F3N3O3 [M+H]+ 388.1, found 387.8.

At the same time, in my other blogs, there are other synthetic methods of this type of compound,33581-98-5, 4-(Hydroxymethyl)pyrimidine, and friends who are interested can also refer to it.

Reference:
Patent; PRAXIS PRECISION MEDICINES , INC.; REDDY, Kiran; MARTINEZ BOTELLA, Gabriel; GRIFFIN, Andrew, Mark; MARRON, Brian, Edward; (244 pag.)WO2018/148745; (2018); A1;,
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Adding a certain compound to certain chemical reactions, such as: 1195768-23-0, N-(3-(2-(tert-Butyl)-5-(2-chloropyrimidin-4-yl)thiazol-4-yl)-2-fluorophenyl)-2,6-difluorobenzenesulfonamide, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound, Recommanded Product: N-(3-(2-(tert-Butyl)-5-(2-chloropyrimidin-4-yl)thiazol-4-yl)-2-fluorophenyl)-2,6-difluorobenzenesulfonamide, blongs to pyrimidines compound. Recommanded Product: N-(3-(2-(tert-Butyl)-5-(2-chloropyrimidin-4-yl)thiazol-4-yl)-2-fluorophenyl)-2,6-difluorobenzenesulfonamide

Preparation Example 1 The preparation of the Known Crystal Form 1: Refer to the preparation method described in example 58a of patent document WO2009/137391A2 or U.S. Pat. No. 7,994,185B2, with the details as follows: Add N-{3-[5-(2-chloro-4-pyrimidinyl)-2-(1,1-dimethylethyl)-1,3-thiazol-4-yl]-2-fluorophenyl}-2,6-difluorobenzenesulfonamide (196 mg, 0.364 mmol) and 7M methanol solution of ammonia (8 ml, 56 mmol) into a 25 mL autoclave, heat to 90 C. and react for 24 h; when the TLC shows the raw material is completely reacted, cool the above reaction system to room temperature, filter to get N-{3-[5-(2-amino-4-pyrimidinyl)-2-(1,1-dimethylethyl)-1,3-thiazol-4-yl]-2-fluorophenyl}-2,6-difluorobenzenesulfonamide (i.e. Dabrafenib). 1H-NMR (400 MHz, DMSO-d6) delta ppm 10.83 (s, 1H), 7.93 (d, J=5.2 Hz, 1H), 7.55-7.70 (m, 1H), 7.35-7.43 (m, 1H), 7.31 (t, J=6.3 Hz, 1H), 7.14-7.27 (m, 3H), 6.70 (s, 2H), 5.79 (d, J=5.13 Hz, 1H), 1.35 (s, 9H). The XPRD pattern is as shown in FIG. 25 and is substantially the same as that of the Known Crystal Form 1 of Dabrafenib prepared in example 58a of patent document U.S. Pat. No. 7,994,185B2. The PLM plot is as shown in FIG. 26. It shows small block-shaped crystals. PSD shows: D10, D50 and D90 are 40 mum, 104 mum and 151 mum, respectively. The dynamic vapor sorption isothermal is as shown in FIG. 27. It shows: the weight change is 1.9% between 20% RH80% RH.

At the same time, in my other blogs, there are other synthetic methods of this type of compound,1195768-23-0, N-(3-(2-(tert-Butyl)-5-(2-chloropyrimidin-4-yl)thiazol-4-yl)-2-fluorophenyl)-2,6-difluorobenzenesulfonamide, and friends who are interested can also refer to it.

Reference:
Patent; Hangzhou Pushai Pharmaceutical Technology Co., LTD.; LAO, Haiping; SHENG, Xiaoxia; Sheng, Xiaohong; US2015/307484; (2015); A1;,
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Adding a certain compound to certain chemical reactions, such as: 3177-24-0, 2,4-Dichloropyrimidine-5-carbonitrile, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound, Recommanded Product: 3177-24-0, blongs to pyrimidines compound. Recommanded Product: 3177-24-0

General procedure: DIPEA (0.86mmol) was added to the solution of 2,4-dichloropyrimidine-5-carnonitrile (0.57mmol) in DMF (0.5ml) and stirred at room temperature for 10min. A solution of aminobenzene reagent corresponding to desired product (0.57mmol) in DMF (0.5ml) was added dropwise to the reaction mixture and stirred for 1h. The resultant was evaporated under vacuum and extracted with EtOAc. The organic layer was collected, washed with brine, dried over MgSO4, filtered, and dried under reduced pressure. 4c was obtained from the reaction of 4b, whereby substitution at the 2-position occurred.

The synthetic route of 3177-24-0 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Phuangsawai, Oraphan; Beswick, Paul; Ratanabunyong, Siriluk; Tabtimmai, Lueacha; Suphakun, Praphasri; Obounchoey, Phongphat; Srisook, Pimonwan; Horata, Natharinee; Chuckowree, Irina; Hannongbua, Supa; Ward, Simon E.; Choowongkomon, Kiattawee; Gleeson, M. Paul; European Journal of Medicinal Chemistry; vol. 124; (2016); p. 896 – 905;,
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

The major producers of chemicals have been the Europe, Japan and China. Due to the growing call for a cleaner, greener environment, people will have to find innovative ways to maintain their relevance. Here is a compound 51421-99-9, name is 4-Chloro-2-methoxypyrimidine. This compound has unique chemical properties. The synthetic route is as follows. Computed Properties of C5H5ClN2O

General procedure: This compound was prepared using a method analogousto that of Example 102 (intermediate 102.1 ), 4-chloro-2-methoxypyrimidine replacing 2,6-difluoropyridine andintermediate 132.4 replacing 2-chloro-5-hydroxybenzoicacid except that the reaction mixture was stirred for 30 min at80 C. LC-MS (B): tR=0.65 min; [M+H]+: 297.04

With the rapid development of chemical substances, we look forward to future research findings about 51421-99-9.

Reference:
Patent; Actelion Pharmaceuticals Ltd.; Hilpert, Kurt; Hubler, Francis; Murphy, Mark; Renneberg, Dorte; US2014/73651; (2014); A1;,
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Application of 56844-12-3 , The common heterocyclic compound, 56844-12-3, name is 6-Bromo-4-chlorothieno[2,3-d]pyrimidine, molecular formula is C6H2BrClN2S, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

General procedure: 6-Bromo-4-chlorothieno[2,3-d]pyrimidine(5a) (200 mg, 0.802 mmol) was mixed with 1-phenylethanol (2a) (118 mg, 0.962 mmol), Cs2CO3( 313 mg, 0.962 mmol) and acetonitrile (2 mL). The reaction was then stirredunder nitrogen atmosphere at reflux and followed by GC. The mixture was cooledto rt, diluted with EtOAc (40 mL), washed with sat. aq. KHCO3 (20mL), water (2×20 mL) and brine (30 mL). The combined organic fractions weredried over Na2SO4 and concentrated in vacuum. Crudeproduct was absorbed onto Celite 545 and purified by silica gel columnchromatography (n-pentane/EtOAc,6/1). This gave 245 mg (0.730 mmol, 91%) of 6a as an off-white solid.

The synthetic route of 56844-12-3 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Han, Jin; Sundby, Eirik; Hoff, Bage H.; Journal of Fluorine Chemistry; vol. 153; (2013); p. 82 – 88;,
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Reference of 1192479-35-8, The major producers of chemicals have been the Europe, Japan and China. Due to the growing call for a cleaner, greener environment, people will have to find innovative ways to maintain their relevance. Here is a compound 1192479-35-8, name is 2-Chloro-5-fluoro-4-methoxy-6-methylpyrimidine. This compound has unique chemical properties. The synthetic route is as follows.

A 1 :3 mixture of 4-(bromomethyl)-2-chloro-5-fluoro-6-methoxypyrimidine : 2- chloro-5-fluoro-4-methoxy-6-methylpyrimidine (2.61 g) was dissolved in dry acetonitrile (10 ml) and sodium acetate (0.3 g) added. The reaction mixture was heated at 90C for seventeen hours then the reaction mixture was cooled and poured into cold water and extracted with dichloromethane (100 ml). The organic layer was dried (MgSC”4) and evaporated and the residue was purified by silica gel column chromatography (gradient from 0 to 10% ethyl acetate / hexane) to afford the title compound (0.455 g) as an oil. LCMS: Rt 1.34 min, m/z 235 [M+H]+.

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about 1192479-35-8, 2-Chloro-5-fluoro-4-methoxy-6-methylpyrimidine.

Reference:
Patent; EISAI R&D MANAGEMENT CO., LTD.; HALL, Adrian; FARTHING, Christopher Neil; EATHERTON, Andrew John; WO2014/13076; (2014); A1;,
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Adding a certain compound to certain chemical reactions, such as: 116247-92-8, 1-Pyrimidin-2-yl-piperidin-4-one, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound, Computed Properties of C9H11N3O, blongs to pyrimidines compound. Computed Properties of C9H11N3O

B. (4-Bromo-2-methyl-phenyl)-( 1 -pyrimidin-2-yl-piperidin-4-yl)-amine : To the mixture of 4-bromo-2-methylaniline (285 mg, 1.5 mmol) and l-pyrimidin-2-yl-piperidin- 4-one (266 mg, 1.5 mmol) in MeOH/AcOH (10:1, 5 ml) was added BH3-Py in THF (8M, 188 mul). The mixture was stirred at rt for 2h. The reaction mixture was concentrated and to the residue was added HCl (10%, 10 ml). The resulting mixture was stirred at room temperature for 30 min., then with cooling, the mixture was adjusted to alkaline with solid Na2CO3 and water. The aqueous layer was extracted with EtOAc (5 x 30 ml). The EPO EtOAc was dried (Na2SO4) and concentrated. The residue was subjected to ISCO to give the titled compound as a white solid (140 mg). HPLC: column, Luna Phenyl-Hexyl 5 mum 4.6×50 mm, 10-90% solvent B (acetonitrile) in solvent A (IO mM ammonium acetate aq) over 3 min., flow rate 3 ml/min, retention time, 2.71 min.; MS (MH+: 347 and 349). 1H NMR (400 MHz, chloroform- d), delta ppm 1.46 (ddd, J=24.30, 10.86, 4.04 Hz, 2H), 2.10 (s, 3 H), 2.17 (dd, J=13.14, 2.78 Hz, 2 H), 3.20 (ddd, J=14.00, 11.87, 2.78 Hz, 1 H), 3.40 (br. s., 1 H), 3.60 (br. s., 1 H), 4.68 (ddd, J=13.52, 3.41, 3.28 Hz, 2 H), 6.50 (t, J=4.67 Hz, 1 H), 6.57 (d, J=8.59 Hz, 1 H), 7.19 (s, 1 H), 7.23 (dd, J=8.59, 2.27 Hz, 1 H), 8.33 (d, J=4.80 Hz, 2 H).; B. (4-Bromo-2-methyl-phenyl)-( 1 -pyrimidin^-yl-piperidin^-yl)- amine : To the mixture of bromoaniline (285 mg, 1.5 mmol) and ketone (266 mg, 1.5 mmol) in MeOH/AcOH (10:1, 5 ml) was added BH3-Py in THF (8M, 188 mul). The mixture was stirred at rt for 2h. The reaction mixture was concentrated and to the residue was added HCl (10%, 10 ml). The resulting mixture was stirred at rt for 30 min., then with cooling, EPO the mixture was adjusted to alkaline with solid Na2CO3 and water. The aq. layer was extracted with EtOAc (5x 30 ml). The EtOAc was dried (Na2SO4) and concentrated. The residue was subjected to ISCO to give the titled compound as a white solid (140 mg).

At the same time, in my other blogs, there are other synthetic methods of this type of compound,116247-92-8, 1-Pyrimidin-2-yl-piperidin-4-one, and friends who are interested can also refer to it.

Reference:
Patent; LEXICON PHARMACEUTICALS, INC.; WO2008/58064; (2008); A1;,
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia