Category: pyrimidines

The preparation of ester heterocycles mostly uses heteroatoms as nucleophilic sites, which are achieved by intramolecular substitution or addition reactions. Compound: 5-Methylfuran-2(3H)-one( cas:591-12-8 ) is researched.Computed Properties of C5H6O2.Dell’Acqua, Andrea; Stadler, Bernhard M.; Kirchhecker, Sarah; Tin, Sergey; de Vries, Johannes G. published the article 《Scalable synthesis and polymerization of a β-angelica lactone derived monomer》 about this compound( cas:591-12-8 ) in Green Chemistry. Keywords: angelica lactone monomer ROMP film property. Let’s learn more about this compound (cas:591-12-8).

Bio-based levulinic acid is easily ring-closed to α-angelica lactone (α-AL). The α-AL can be isomerized to the conjugated β-AL under the influence of base, but since this is an equilibrium mixture it is very hard to devise a scalable process that would give pure β-AL. This problem was circumvented by distilling the equilibrium mixture to obtain a 90 : 10 mixture of β- and α-AL in 88% yield. This mixture was used for Diels-Alder reactions on 3 terpenes and on cyclopentadiene in up to 100 g scale. The latter DA adduct was subjected to a ROMP reaction catalyzed by the Grubbs II catalyst. The resulting polymer has some similarities to poly-norbornene but is more polar. The polymer can be processed into films with very good transparency.

Here is a brief introduction to this compound(591-12-8)Computed Properties of C5H6O2, if you want to know about other compounds related to this compound(591-12-8), you can read my other articles.

Reference:
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Hommes, Arne; ter Horst, Arie Johannes; Koeslag, Meine; Heeres, Hero Jan; Yue, Jun published an article about the compound: 5-Methylfuran-2(3H)-one( cas:591-12-8,SMILESS:O=C1OC(C)=CC1 ).HPLC of Formula: 591-12-8. Aromatic heterocyclic compounds can be classified according to the number of heteroatoms or the size of the ring. The authors also want to convey more information about this compound (cas:591-12-8) through the article.

The hydrogenation of levulinic acid (LA) to γ-valerolactone (GVL) was performed in perfluoroalkoxy alkane capillary microreactors packed with a carbon-supported ruthenium (Ru/C) catalyst with an average particle diameter of 0.3 or 0.45 mm. The reaction was executed under an upstream gas-liquid slug flow with 1,4-dioxane as the solvent and H2 as the hydrogen donor in the gas phase. Operating conditions (i.e., flow rate and gas to liquid flow ratio, pressure, temperature and catalyst particle size) were varied in the microreactor to determine the influence of mass transfer and kinetic characteristics on the reaction performance. At 130°C, 12 bar H2 and a weight hourly space velocity of the liquid feed (WHSV) of 3.0 gfeed/(gcat·h), 100% LA conversion and 84% GVL yield were obtained. Under the conditions tested (70-130°C and 9-15 bar) the reaction rate was affected by mass transfer, given the notable effect of the mixture flow rate and catalyst particle size on the LA conversion and GVL yield at a certain WHSV. A microreactor model was developed by considering gas-liquid-solid mass transfer therein and the reaction kinetics estimated from the literature correlations and data. This model well describes the measured LA conversion for varying operating conditions, provided that the internal diffusion and kinetic rates were not considered rate limiting. Liquid-solid mass transfer of hydrogen towards the external catalyst surface was thus found dominant in most experiments The developed model can aid in the further optimization of the Ru/C catalyzed levulinic acid hydrogenation in packed bed microreactors.

Here is a brief introduction to this compound(591-12-8)HPLC of Formula: 591-12-8, if you want to know about other compounds related to this compound(591-12-8), you can read my other articles.

Reference:
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Related Products of 591-12-8. Aromatic compounds can be divided into two categories: single heterocycles and fused heterocycles. Compound: 5-Methylfuran-2(3H)-one, is researched, Molecular C5H6O2, CAS is 591-12-8, about Furfural hydrogenation, hydrodeoxygenation and etherification over MoO2 and MoO3: A combined experimental and theoretical study. Author is Kojcinovic, Aleksa; Kovacic, Zan; Hus, Matej; Likozar, Blaz; Grilc, Miha.

Valorization of lignocellulosic biomass, particularly catalytic hydrotreatment of hemicellulose-based furfural (FUR), has been studied for the production of value-added chems. A three-phase batch reactor has been used for hydrotreatment in isopropanol over various com. available unsupported MoOx catalysts, at various temperatures (170-230°C), pressures (0-80 bar H2), catalyst loadings (0-2 weight%), and reactant concentrations (5-20 weight%). No significant difference in catalytic activity or selectivity has been observed among the three different MoO3 and one MoO2 catalysts, while NiMo/Al2O3, Mo2C and WO3 were much less active. Data-points collected have been used to propose a detailed reaction pathway network for a micro-kinetic model, which also took into consideration the thermodn., and adsorption, desorption, and surface reaction kinetics. The alcoholysis of FUR yielded valuable iso-Pr levulinate (IPL) as the major product under all tested reaction conditions, while other value-added compounds (furfuryl alc., iso-Pr furfuryl ether, furfuryl acetone, angelica lactone) were observed in smaller quantities. It was found that neither the presence nor the absence of the gaseous H2 pressure contributes to the global reaction rate, or selectivity, since the solvent acts as a sufficient hydrogen donor. Addnl., d. functional theory (DFT) calculations provided further insight into the active planes present by the implementation of the Wulff construction. Furthermore, the reaction mechanism was explained based on reaction energies, which were in silico determined and compared for several surfaces. The results were consistent with the characterization and activity-testing results. The furfural ring-opening reaction, yielding valuable IPL in the absence of gaseous H2, over a cheap bulk MoOx is reported for the first time.

Here is a brief introduction to this compound(591-12-8)Related Products of 591-12-8, if you want to know about other compounds related to this compound(591-12-8), you can read my other articles.

Reference:
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Epoxy compounds usually have stronger nucleophilic ability, because the alkyl group on the oxygen atom makes the bond angle smaller, which makes the lone pair of electrons react more dissimilarly with the electron-deficient system. Compound: 5-Methylfuran-2(3H)-one, is researched, Molecular C5H6O2, CAS is 591-12-8, about Catalyst-controlled regioselective nitrosocarbonyl aldol reaction of deconjugated butenolides.Category: pyrimidines.

An unprecedented regiodivergent nitrosocarbonyl aldol reaction of γ-substituted deconjugated butenolides was described. While Lewis base catalyst quinidine leveraged O-selective nitrosocarbonyl aldol reaction exclusively at the γ-position of deconjugated butenolides to produce γ-substituted-butenolides I [R = Me, n-Pr, PhCH2, etc.; R1 = t-BuO, OCH2CH=CH2, PhCH2O, 4-MeC6H4, etc.], Lewis acid catalyst Cu(OTf)2 steered the competitive N-selective nitrosocarbonyl aldol reaction at the β-position, resulting in hetero-β,γ-difunctionalized-butenolides II [R2 = Me, Ph, 4-MeC6H4CH2, PhCH2; R3 = t-Bu, PhCH2, 1-naphthyl, etc.]. Both processes were amenable to a broad range of substrates and scalable, while the latter one represented a rare example of one-pot hetero-β,γ-difunctionalization of butenolide scaffolds.

Here is a brief introduction to this compound(591-12-8)Category: pyrimidines, if you want to know about other compounds related to this compound(591-12-8), you can read my other articles.

Reference:
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

In general, if the atoms that make up the ring contain heteroatoms, such rings become heterocycles, and organic compounds containing heterocycles are called heterocyclic compounds. An article called From Milligram to Kilogram Manufacture of AZD4573: Making It Possible by Application of Enzyme-, Iridium-, and Palladium-Catalyzed Key Transformations, published in , which mentions a compound: 1260667-65-9, Name is 5-Chloro-4-iodopyridin-2-amine, Molecular C5H4ClIN2, Related Products of 1260667-65-9.

With the first generation medicinal chem. synthesis as a starting point, herein process development of AZD4573, an oncol. drug candidate was described. In addition to improved yields and removal of chromatog. steps, other factors such as availability of starting materials as well as safety of the chem. involved were addressed. With several steps involving volatile, reactive, and non-UV active materials, reaction optimization was facilitated by implementing off-line 1H NMR anal. of crude mixtures Key transformations targeted for process development included a Wolff-Kishner reduction, an iridium-catalyzed borylation, and enzymic resolution of a racemic amino-ester.

In some applications, this compound(1260667-65-9)Related Products of 1260667-65-9 is unique.If you want to know more details about this compound, you can contact with the author or consult more relevant literature.

Reference:
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Recommanded Product: 120099-61-8. The protonation of heteroatoms in aromatic heterocycles can be divided into two categories: lone pairs of electrons are in the aromatic ring conjugated system; and lone pairs of electrons do not participate. Compound: (S)-3-Methoxypyrrolidine, is researched, Molecular C5H11NO, CAS is 120099-61-8, about Ultrapotent vinblastines in which added molecular complexity further disrupts the target tubulin dimer-dimer interface. Author is Carney, Daniel W.; Lukesh, John C. III; Brody, Daniel M.; Brutsch, Manuela M.; Boger, Dale L..

Approaches to improving the biol. properties of natural products typically strive to modify their structures to identify the essential pharmacophore, or make functional group changes to improve biol. target affinity or functional activity, change phys. properties, enhance stability, or introduce conformational constraints. Aside from accessible semisynthetic modifications of existing functional groups, rarely does one consider using chem. synthesis to add mol. complexity to the natural product. In part, this may be attributed to the added challenge intrinsic in the synthesis of an even more complex compound Herein, we report synthetically derived, structurally more complex vinblastines inaccessible from the natural product itself that are a stunning 100-fold more active (IC50 values, 50-75 pM vs. 7 nM; HCT116), and that are now accessible because of advances in the total synthesis of the natural product. The newly discovered ultrapotent vinblastines, which may look highly unusual upon first inspection, bind tubulin with much higher affinity and likely further disrupt the tubulin head-to-tail α/β dimer-dimer interaction by virtue of the strategic placement of an added conformationally well-defined, rigid, and extended C20′ urea along the adjacent continuing protein-protein interface. In this case, the added mol. complexity was used to markedly enhance target binding and functional biol. activity (100-fold), and likely represents a general approach to improving the properties of other natural products targeting a protein-protein interaction.

In some applications, this compound(120099-61-8)Recommanded Product: 120099-61-8 is unique.If you want to know more details about this compound, you can contact with the author or consult more relevant literature.

Reference:
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Related Products of 591-12-8. Aromatic heterocyclic compounds can also be classified according to the number of heteroatoms contained in the heterocycle: single heteroatom, two heteroatoms, three heteroatoms and four heteroatoms. Compound: 5-Methylfuran-2(3H)-one, is researched, Molecular C5H6O2, CAS is 591-12-8, about 5-(Chloromethyl)furfural (CMF): A Platform for Transforming Cellulose into Commercial Products. Author is Mascal, Mark.

5-(Chloromethyl)furfural (CMF) is a carbohydrate-derived platform mol. that is gaining traction as a more practical alternative to 5-(hydroxymethyl)furfural (HMF). This perspective introduces the chemocatalytic approach to biorefining as the driving force behind the development of multifunctional chem. platforms. The main advantage of CMF over HMF is that it can be produced in high yield under mild conditions directly from raw biomass. Its stability and hydrophobicity markedly facilitate isolation. CMF is also a precursor to levulinic acid (LA), another versatile biobased intermediate. The logistics of CMF production are discussed, including reactor materials, HCl handling and management, byproducts, and the fate of collateral biomass components (hemicellulose, lipids, proteins, lignin). Examples of com. markets that can be unlocked by synthetic manipulation of CMF are broken out into two derivative manifolds, furanic and levulinic, which are distributed over three product family trees: renewable monomers, fuels, and specialty chems. Selected examples of CMF- and LA-based routes to these products are presented. Finally, a model for the integration of the CMF process into biorefinery practice is put forward.

In some applications, this compound(591-12-8)Related Products of 591-12-8 is unique.If you want to know more details about this compound, you can contact with the author or consult more relevant literature.

Reference:
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

The reaction of an aromatic heterocycle with a proton is called a protonation. One of articles about this theory is 《4,5-Dihalo and 3-amino analogs of pyridoxine. New route to 4-deoxypyridoxine》. Authors are McCasland, G. E.; Gottwald, L. Kenneth; Furst, Arthur.The article about the compound:5-(hydroxymethyl)-2,4-dimethylpyridin-3-ol hydrochloridecas:148-51-6,SMILESS:OC1=C(C)C(CO)=CN=C1C.[H]Cl).Recommanded Product: 148-51-6. Through the article, more information about this compound (cas:148-51-6) is conveyed.

Dihalo analogs of pyridoxine, expected to show good alkylating activity, were prepared as potential antitumor agents. SOCl2 (15.0 ml.) was added to 2.06 g. powd. dry pyridoxine hydrochloride (I), the mixture refluxed 1 hr., cooled to 0-25° for several days, filtered, and the crystals washed with C6H6, then with 10 ml. Me2CO, m. 140-90°. Recrystallization from absolute EtOH-C6H6 gave 1.6 g. needles. Dissolution in 25 ml. boiling absolute EtOH and treatment with 25 ml. hot C6H6 gave on cooling 0.9 g. 2-methyl-3-hydroxy-4,5-bis(chloromethyl)pyridine hydrochloride (II), m. 175-90° (decomposition), recrystallized from 10 ml. EtOH to yield 0.7 g. product, m.p. unchanged. I (6.2 g.) treated with 43.5 ml. SOCl2 but kept at 25° only 12 hrs. gave after washing with Me2CO 7.1 g. II, m. 185-95° (decomposition). The use of PCl5 in CCl4, or concentrated HCl, failed to yield pure II. I (21.4 g.) and 200 ml. 8.8M HBr was refluxed 15 min., cooled, filtered, and the solid washed with H2O and Me, CO to give 24.2 g. crystalline 2methyl-3-hydroxy-4,5-bis(bromomethyl)pyridine hydrobromide (III), m. 224-8° (decomposition). III (1.88 g.) was stirred with 0.463 g. NaHCO3 in 20 ml. H2O; the mixture turned pink, then red, and after 100 min. stirring was filtered. The solid was washed with H2O and dried to give 0.6 g. brown-red powder, m. above 325°. The pH of the filtrate was 2, indicating displacement of one or both Br atoms from BrCH2. The solid was insoluble at the boiling point in EtOH, H2O, or 6M HCl. I (2.06 g.) boiled with 67.2 g. 7.6M HI gave 1.3 g.2-methyl-3-hydroxy-4,5-bis(iodomethyl)pyridine hydriodide (IV), m. 120-60° (decomposition). III with NaI in Me2CO failed to give IV. 2-Methyl-3-amino-4,5-bis(hydroxymethyl)pyridine monohydrochloride (V), m. 195-7°, with 8.8M HBr gave 34% 2 methyl-3-amino4,5-bis(bromomethyl)pyridine hydrobromide, m. 220° (decomposition). When 1.0 g. V was boiled with 6.5 ml. 7.6M HI, iodine was liberated and one of the HOCH2 groups was reduced to Me to give 0.59 g. black crystalline mass, which was crystallized from absolute EtOH to yield light yellow 2,4-dimethyl-3-amino-5-(hydroxymethyl)pyridine hydriodide (VI), m. 190-6°, VI (50 mg.) was heated 5 min. with 43 mg. AgCl in 1.0 ml. H2O, the mixturefiltered to remove AgI, the filtrate acidified with 0.2 ml. 12M HCl, the acid solution treated with 23 mg. NaNO2 in 1.0 ml. H2O, and the mixture heated until N effervescence ceased (10-15 min.). The solution was vacuum-distilled to dryness, 0.5 ml. 12M HCl added to the residue, the distillation to dryness repeated, the residue extracted with 2.0 ml. absolute EtOH, cooled, and filtered. The filtrate was treated with Et2O and the separated crystals collected and dried to yield 10 mg. 4-deoxypyridoxine hydrochloride, m. 255° (decomposition). V (1.0 g.), 0.8 g. fused NaOAc, and 20 ml. Ac2O was boiled 20 min., the solvent removed by vacuum distillation, the residue extracted with 15 ml. CHCl3, the CHCl3 extract treated with C, and evaporated to give a brown oil, which was stirred with 2.0 ml. Et2O to yield 0.4 g. solid 2-methyl-3-acetamido-4,5-bis(acetoxymethyl)pyridine (VII), m. 103-1° (C6H6). VII (0.42 g.) in 12 ml. 0.5M NaOH was kept 2 hrs. at 20°, the clear solution adjusted to pH 6-7 by addition of HOAc, the solvent evaporated in vacuo, the residue extracted (Soxhlet) 24 hrs. with Me2CO, and the extract cooled to give 0.1 g. crystalline 2-methyl-3-acetamido-4,5-bis(hydroxymethyl)pyridine, m. 185-6°.

In some applications, this compound(148-51-6)Recommanded Product: 148-51-6 is unique.If you want to know more details about this compound, you can contact with the author or consult more relevant literature.

Reference:
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

The reaction of an aromatic heterocycle with a proton is called a protonation. One of articles about this theory is 《β-Amino acids. IV. β-Methionine and β-ethionine》. Authors are Birkofer, Leonhard; Storch, Ingeborg.The article about the compound:2-Bromo-3-methoxypropanoic acidcas:65090-78-0,SMILESS:O=C(O)C(Br)COC).Recommanded Product: 2-Bromo-3-methoxypropanoic acid. Through the article, more information about this compound (cas:65090-78-0) is conveyed.

cf. C.A. 49, 2317d. HO2CCHAcCH2CO2Et and NaH gave the Na salt, which with ClCH2SMe yielded EtO2CAc(CH2SMe)CH2CO2Et (I), b3 153° (2,4-dinitrophenylhydrazone, m. 92-3°). Refluxed 10 hrs. with 18% HCl I gave AcCH(CH2SMe)CH2CO2H, isolated as the Et ester (II), b3 123° (2,4-dinitrophenylhydrazone, m. 62-3°), as well as AcC(:CH2)CH2CO2H (2,4-dinitrophenylhydrazone, m. 210°), and 3-acetyl-γ-butyrolactone (2,4-dinitrophenylhydrazone, m. 193°). I refluxed with HCl only 4 hrs. gave mono-Et 2-acetyl-2-(methylthiomethyl)succinate, b0.001 115-17° (2,4-dinitrophenylhydrazone, m. 169-70°). I was saponified with Ba(OH)2 to HO2CCH(CH2SMe)CH2CO2H, m. 114-15°. II and HN3 in the presence of HCl gave β-methionine (III), m. 197-8° (picrolonate, m. 190-2°; 3,5-dinitrobenzoyl derivative, m. 200°). MeSCH2CH:CHCO2H, m. 58.5°, obtained from MeSCH2CHO and CH2(CO2H)2 (IV), gave III with NH3 in a sealed tube at 150-60°. EtSNa, obtained from EtSH with Na, and bromoacetal gave EtSCH2CH(OEt)2, converted by HCl to the aldehyde, b14 45-6°, which with IV gave EtSCH2CH:CHCO2H, which with NH3 in a sealed tube yielded β-ethionine (V), m. 198° (picrolonate, m. 180-3°). III and V do not react with aqueous ninhydrin, but give a blue color with it in 95% BuOH-5% 2N HOAc.

In some applications, this compound(65090-78-0)Recommanded Product: 2-Bromo-3-methoxypropanoic acid is unique.If you want to know more details about this compound, you can contact with the author or consult more relevant literature.

Reference:
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Quality Control of 2-Bromo-3-methoxypropanoic acid. Aromatic heterocyclic compounds can also be classified according to the number of heteroatoms contained in the heterocycle: single heteroatom, two heteroatoms, three heteroatoms and four heteroatoms. Compound: 2-Bromo-3-methoxypropanoic acid, is researched, Molecular C4H7BrO3, CAS is 65090-78-0, about N-Substituted amino acid N’-benzylamides: synthesis, anticonvulsant, and metabolic activities. Author is Beguin, Cecile; LeTiran, Arnaud; Stables, James P.; Voyksner, Robert D.; Kohn, Harold.

Amino acid amides (AAA) were prepared and evaluated in seizure models. The AAA displayed moderate-to-excellent activity in the maximal electroshock seizure (MES) test and were devoid of activity in the s.c. Metrazol-induced (scMet) seizure test. The AAA anticonvulsant activity was neither strongly influenced by the C(2) substituent nor by the degree of terminal amine substitution. An in vitro metabolism study suggested that the structure-activity relationship pattern was due, in part, to metabolic processes that occurred at the N-terminal amine unit.

In some applications, this compound(65090-78-0)Quality Control of 2-Bromo-3-methoxypropanoic acid is unique.If you want to know more details about this compound, you can contact with the author or consult more relevant literature.

Reference:
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia