Category: pyrimidines

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 113583-35-0, name is 2-Methanesulfonyl-4,6-dimethoxypyrimidine, the common compound, a new synthetic route is introduced below. 113583-35-0

General procedure: For the synthesis of 6-22 to 6-33, intermediate 5 (4.0 mmol),intermediate 2 or 3 (2.66 mmol) and tetrabutyl ammonium bromide(0.3 mmol) were added to 50 mL 90% ethanol. After that the reaction continued for 15 h under reflux and every 2 h the pH value of the mixture was adjusted to >7 by adding saturated sodium bicarbonate solution. The crude product was further extracted three times by using sodium hydroxide solution and ethyl acetate.The aqueous layer was then adjusted by hydrochloric acid to a pH value of 3-4. The product was extracted by ethyl acetate and finally purified by flash column chromatography using dichloromethane/methanol (80:1) and the yields were in the range of 14%-35%.

Statistics shows that 113583-35-0 is playing an increasingly important role. we look forward to future research findings about 2-Methanesulfonyl-4,6-dimethoxypyrimidine.

Reference:
Article; Wu, Ren-Jun; Zhou, Kai-Xuan; Yang, Haijin; Song, Guo-Qing; Li, Yong-Hong; Fu, Jia-Xin; Zhang, Xiao; Yu, Shu-Jing; Wang, Li-Zhong; Xiong, Li-Xia; Niu, Cong-Wei; Song, Fu-Hang; Yang, Haitao; Wang, Jian-Guo; European Journal of Medicinal Chemistry; vol. 167; (2019); p. 472 – 484;,
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

1004-40-6 , The common heterocyclic compound, 1004-40-6, name is 6-Amino-4-hydroxy-2-mercaptopyrimidine, molecular formula is C4H5N3OS, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

General procedure: A mixture of 0.174 g of 3-methyl-1-phenyl-2-pyrazoline-5-one (1, 1.0 mmol), 0.150 g of 4-chlorobenzaldehyde (2,1 mmol), 0.160 g of 6-amino-2-thiouracil (3, 1 mmol) and 9.8 mm3 of piperidine as a catalyst (10%) in 8 cm3 of ethanol in a 100-cm3 round-bottomed flask fitted with areflux condenser was heated with stirring in an oil bath maintained at 80 C. After the complete appearance of the white solid and monitored by TLC, the reaction mixture was cooled to room temperature and resulting solid product was filtered, washed with ethanol to give products 4a-4r.

The synthetic route of 1004-40-6 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Bayat, Mohammad; Nasri, Shima; Mohammadali, Mohammad Reza; Monatshefte fur Chemie; vol. 148; 10; (2017); p. 1833 – 1842;,
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Adding a certain compound to certain chemical reactions, such as: 504-17-6, 4,6-Dihydroxy-2-mercaptopyrimidine, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound, 504-17-6, blongs to pyrimidines compound. 504-17-6

General procedure: A mixture of an aldehyde (0.25mmol), 2-thiobarbituric acid (0.5mmol), ammonium acetate (0.3mmol) and CuFe2O4 (10mol%) were added in distilled H2O. Then, ultrasonic probe was directly immersed in the resulting mixture. After completion of the reaction (TLC), the solvent was evaporated and the precipitate was washed from ethanol and hot water to afford the pure product. All products were identified by physical and spectroscopic data. 2.4.1 5-Phenyl-2,8-dithioxo-2,3,7,8,9,10-hexahydropyrido[2,3-d:6,5-d]dipyrimidine-4,6(1H,5H)-dione (0009) Cream powder; M.P: 211C Lit [39]. (M.Prep: 238C, decompose); IR (KBr) nu (cm-1): 3452 (NH), 3054 (C-H, sp2 stretch), 2898 (C-H, sp3), 1637 (C=O), 1440, 1559 (C=C, Ar); 1H NMR (DMSO-d6, 400MHz) delta (ppm): 5.93 (s, 1H, CH), 6.98-6.99 (d, 2H, J=4Hz), 7.05-7.08 (m, 1H), 7.15 (s, 2H), 7.42-7.72 (m, 1H), 7.89-8.20 (m, 1H), 11.33-11.66 (s, 1H), 12.04-12.09 (m, 1H).

With the rapid development of chemical substances, we look forward to future research findings about 504-17-6.

Reference:
Article; Naeimi, Hossein; Didar, Asieh; Ultrasonics Sonochemistry; vol. 34; (2017); p. 889 – 895;,
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

272-24-2, The major producers of chemicals have been the Europe, Japan and China. Due to the growing call for a cleaner, greener environment, people will have to find innovative ways to maintain their relevance. Here is a compound 272-24-2, name is Thieno[2,3-d]pyrimidine. This compound has unique chemical properties. The synthetic route is as follows.

EXAMPLE 1 Preparation of 5,6,7,8-tetrahydro-4-[(3-chloro-4-methoxy)benzylamino]-7-ethoxycarbonyl-2-(3-pyridyl)pyrido[4′,3′:4,5]thieno[2,3-d]pyrimidine (Compound No. 1-15) 4.1 g of 5,6,7,8-tetrahydro-4-oxo-7-ethoxycarbonyl-2-(3-pyridyl)pyrido[4′,3′:4,5]thieno[2,3-d]pyrimidine was added to 40 ml of phosphorus oxychloride, and stirred at 80 to 100 C. for 3 hours. After phosphorus oxychloride was distilled off under reduced pressure, 50 ml of water was added to the reaction residue. The reaction solution was made alkaline with an aqueous saturated solution of sodium hydrogen carbonate while cooling, and extracted with chloroform. The organic layer was washed with saturated salt water and dried over anhydrous magnesium sulfate. Magnesium sulfate was filtered off. The filtrate was concentrated under reduced pressure to give 5.0 g of 5,6,7,8-tetrahydro-4-chloro-7-ethoxycarbonyl-2-(3-pyridyl)pyrido[4′,3′:4,5]thieno[2,3-d]pyrimidine. To 5.0 g of 5,6,7,8-tetrahydro-4-chloro-7-ethoxycarbonyl-2-(3-pyridyl)pyrido[4′,3′:4,5]thieno[2,3-d]pyrimidine were added 50 ml of DMSO and 2.5 g of 3-chloro-4-methoxybenzylamine, and heated with stirring at 80 C. for 3 hours. The reaction solution was poured into water. The deposited crystals were separated by filtration and dried to give 4.2 g of the title compound. m.p. 223-225 C.

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about 272-24-2, Thieno[2,3-d]pyrimidine.

Reference:
Patent; Nippon Soda Co., Ltd.; US6482948; (2002); B1;,
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

63234-80-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 63234-80-0, name is 3-(2-Chloroethyl)-2-methyl-6,7,8,9-tetrahydro-4H-pyrido[1,2-a]pyrimidin-4-one, the common compound, a new synthetic route is introduced below.

General procedure: A creamy white solid of 3-(2-chloroethyl)- 2-methyl-6,7,8,9-tetrahydro-4H-pyrido[1,2-a] pyrimidin-4-one (5) (1.0eq) in N,N-dimethylformamide was taken, pottasium carbonate (3.0 eq) was added to the reaction mixture and then the appropriate aliphatic/ aromatic/heterocyclic amines (1.0 eq) were added and the reaction mixture was heated at 80 ¡ãC for 8h. The progress of the reaction was monitored by TLC. Upon completion, the solvent was removed by water wash and extracted with ethyl acetate. The organic layer was washed with 10percent ammonium chloride solution and finally water wash was given to organic layer and dried with anhydrous sodium sulphate. The solvent was evaporated to get crude product which was purified by column chromatography over silica gel (60-120mesh) using hexane: ethyl acetate(8:2) as an eluent.

Statistics shows that 63234-80-0 is playing an increasingly important role. we look forward to future research findings about 3-(2-Chloroethyl)-2-methyl-6,7,8,9-tetrahydro-4H-pyrido[1,2-a]pyrimidin-4-one.

Reference:
Article; Krishnamurthy, Byregowda; Vinaya, Kambappa; Rakshith, Devraj; Prasanna, Doddakunche Shivaramu; Rangappa, Kanchugarakoppal Subbegowda; Medicinal Chemistry; vol. 9; 2; (2013); p. 240 – 248;,
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

1500-85-2, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 1500-85-2, name is 7H-Pyrrolo[2,3-d]pyrimidin-4-amine, molecular formula is C6H6N4, The compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

General procedure: Procedure C: A solution of 4-methyl-7H-pyrrolo[2,3-d]pyrimidine (1, 0.4 g, 3.0 mmol), 5-bromo-2-(4-methoxybenzyl) isoindolin-1-one (2, 1.0 g, 4.5 mmol) and potassium phosphate (1.91 g, 9.0 mmol) in 1, 4-dioxane (15 ml) was degassed with nitrogen for 10 min. Copper (I) iodide (0.28 g, 1.5 mmol) and trans-1, 2-diaminocyclohexane (0.17 g, 1.5 mmol) were added and the reaction was refluxed at 90 C. for 16 h. Progress of the reaction was monitored by TLC. After completion, solvent was removed under reduced pressure. The reaction mixture was diluted with water and extracted twice with ethyl acetate. The organic layer was separated, dried over sodium sulphate, filtered and concentrated under reduced pressure to afford 2-(4-methoxybenzyl)-5-(4-methyl-7H-pyrrolo [2, 3-d] pyrimidin-7-yl) isoindolin-1-one (3) as a yellow solid. Yield: 0.55 g, 47%;

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 1500-85-2, 7H-Pyrrolo[2,3-d]pyrimidin-4-amine, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; EFFECTOR THERAPEUTICS, INC.; Sprengeler, Paul A.; Reich, Siegfried H.; Ernst, Justin T.; Webber, Stephen E.; (55 pag.)US2017/121339; (2017); A1;,
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials. 49845-33-2, name is 2,4-Dichloro-5-nitropyrimidine. A new synthetic method of this compound is introduced below., 49845-33-2

solution of 2, 4-dichloro-5-nitro pyrimidine (7.26g, 37.4mmol) in THF (100 ml) is cooled to -78 oC. A solution of methyl amine (8M in methanol, 9.35 ml, 74.8 mmol) is added dropwise. The mixture is allowed to warm to room temp and concentrated. The residue is partitioned between ethylacetate and water. The layer is separated and the aqueous layer is extracted with ethylacetate. The combined organic extracts are washed with brine, dried over Na2SO4, filtered and concentrated to afford the title product (7.0 g) (Note: The product contains 5percent regio-isomer, 4-chloro-2-(methylamino)-5-nitropyrimidine). The residue is used in the next step without further purification. mp: 86-87 OC; 1H NMR (300 MHz, CDCl3): delta 9.06 (s, 1H), 8.43 (brs, 1H), 3.25 (d, J = 5.12 Hz, 3H) ppm; m/z=189 (M+).

At the same time, in my other blogs, there are other synthetic methods of this type of compound,49845-33-2, 2,4-Dichloro-5-nitropyrimidine, and friends who are interested can also refer to it.

Reference:
Article; Sadanandam; Jyothi; Adharvana Chari; Das, Parthasarathi; Mukkanti; Tetrahedron Letters; vol. 52; 42; (2011); p. 5521 – 5524;,
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 771-81-3, name is 4-Amino-2-(methylthio)pyrimidine-5-carboxylic acid, the common compound, a new synthetic route is introduced below. 771-81-3

To a solution of 4-amino-2-methylmercaptopyrimidine-5-carboxylic acid (185 mg, 1 mmol) and p-methoxybenzyl amine (164 mg, 1.2 mmol) in N,N-dimethylformamide was added 1-hydroxybenzotriazole (92 mg, 92 mmol) and 1-(3-dimethylaminopropyl)-3-ethylcarboiimide hydrochloride (229 mg, 1.2 mmol). The reaction mixture was stirred at room temperature over night. The solvent was removed under reduce pressure. The residue was dissolved in ethyl acetate (30 mL) and washed by water (30 mL) and brine (30 mL), dried over sodium sulfate, and the solvent was ecaporated. The residue was purified by column chromatography (hexanes:ethyl acetate=1:1) to give the desired product as a white powder (245 mg, 81%). [0310] HPLC (4 minute gradient) tR=2.09 min; MS m/z 305.08 (M+H)+

Statistics shows that 771-81-3 is playing an increasingly important role. we look forward to future research findings about 4-Amino-2-(methylthio)pyrimidine-5-carboxylic acid.

Reference:
Patent; Lang, Hengyuan; Lan, Jiong; Fang, Yunfeng; US2005/20590; (2005); A1;,
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

2380-63-4, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 2380-63-4, name is 1H-Pyrazolo[3,4-d]pyrimidin-4-amine, molecular formula is C5H5N5, The compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

Scheme 1 depicts the synthesis of 2-( 4-amino-lH-pyrazolo[3,4-d]pyrimidin-3-yl) iodide (Cpd. 1-3), an intermediate in the synthesis of the compounds of the invention and its further reactions to obtain final inhibitor analogs. Cyano substituted aminopyrazole 1-1 is heated with formamide at 1600C for 5 hours to yield 2-( 4- amino-lH-pyrazolo[3,4-d]pyrimidine (compound 1-2) in 90% yield. This intermediate is reacted with N- iodosuccinimide in dimethylformamide at 800C for 16 hours, to produce 2-( 4-amino-lH-pyrazolo[3,4-d]pyrimidin-3- yl iodide (Cpd. 1-3) in 90% yield.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 2380-63-4, 1H-Pyrazolo[3,4-d]pyrimidin-4-amine, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; INTELLIKINE, INC.; REN, Pingda; LIU, Yi; LI, Liansheng; CHAN, Katrina; WILSON, Troy, Edward; MARTIN, Michael; ROMMEL, Christian; WO2010/6086; (2010); A2;,
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials. 147118-40-9, name is Rosuvastatin methyl ester. A new synthetic method of this compound is introduced below., 147118-40-9

Example 4130.0 g (0.061 mol) of crystalline Form II rosuvastatin methylester are suspended in 150 cm3 of water with stirring at 25 ¡ãC. Into the suspension thus obtained, 61 cm of 1.0 M aqueous TBA solution are added. Thereafter in two hours periods, each time 12.2 cm3 of 1.0 M aqueous TBA solution added to the reaction mixture four times. After 16 hours reaction time, a further 12.2 cm3 portion of 1.0 M aqueous TBA solution are added and the reaction mixture is stirred for a further 24 hours. The product is filtered, washed with cold ethylacetate and dried. Thus 28.5 g (84 percent) of white product having purity (HPLC) of 99.98 percent are obtained.

At the same time, in my other blogs, there are other synthetic methods of this type of compound,147118-40-9, Rosuvastatin methyl ester, and friends who are interested can also refer to it.

Reference:
Patent; EGIS GYOGYSZERGYAR NYILVANOSAN M?KOeD? RESZVENYTARSASAG; KOVANYINE LAX, Gyoergyi; SIMIG, Gyula; VOLK, Balazs; BARTHA, Ferenc Lorant; KRASZNAI, Gyoergy; RUZSICS, Gyoergy; SIPOS, Eva; NAGY, Kalman; MOROVJAN, Gyoergy; BARKOCZY, Jozsef; KESZTHELYI, Adrienn; IMRE, Janos; BAGYINSZKI, Gabor; WO2012/73055; (2012); A1;,
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia