Month: April 2022

The three-dimensional configuration of the ester heterocycle is basically the same as that of the carbocycle. Compound: 5-(hydroxymethyl)-2,4-dimethylpyridin-3-ol hydrochloride(SMILESS: OC1=C(C)C(CO)=CN=C1C.[H]Cl,cas:148-51-6) is researched.Safety of 4-(Pyridin-2-yl)benzoic acid. The article 《Phosphorescence characteristics of several antimetabolites》 in relation to this compound, is published in Talanta. Let’s take a look at the latest research on this compound (cas:148-51-6).

Phosphorescence excitation and emission wavelength peaks, lifetimes, limits of detection, and concentration ranges of anal. usefulness of 37 antimetabolites in rigid (77°K.) ethanolic solution were determined Seventeen of the metabolites produced anal. useful phosphorescence, whereas the remaining 20 were of limited or no anal. use.

If you want to learn more about this compound(5-(hydroxymethyl)-2,4-dimethylpyridin-3-ol hydrochloride)Product Details of 148-51-6, you may wish to communicate with the author of the article,or consult the relevant literature related to this compound(148-51-6).

Reference:
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Most of the natural products isolated at present are heterocyclic compounds, so heterocyclic compounds occupy an important position in the research of organic chemistry. A compound: 591-12-8, is researched, SMILESS is O=C1OC(C)=CC1, Molecular C5H6O2Journal, Yancao Keji called Online analysis of aerosol components of heated tobacco products by GC-MS, Author is Deng, Ting; Tuo, Suxing; Yang, Huawu; Du, Wen; Chen, Bo; Yin, Xinqiang; Huang, Ping; Deng, Changjian; Gong, Shuguo; Lu, Hongmei; Tan, Xinliang; Zhong, Kejun, the main research direction is aerosol heated tobacco product GC MS.Electric Literature of C5H6O2.

In order to study the chem. composition of aerosols from heated tobacco products (HTPs) and to investigate the puff-by-puff release characteristics of aerosols from HTP samples, an online sampling device for HTP aerosols was developed by adopting a valve injection technique. Using this technique, HTP aerosols were directly introduced into gas chromatog.-mass spectrometry (GC-MS) by carrier gas (helium) through an inline heating transmission line without sample loss. The results showed that the online HTP aerosol anal. system had a stable performance and good reproducibility. The contents of acetone and 2-butanone determined in the aerosols of sample A by this method was in good accordance with the results reported by literature. With the proceeding of puffing, the releases of acetone and 2-butanone from the aerosols of sample B increased first and then decreased. This method is simple, efficient and suitable for the online anal. of the whole aerosols of HTPs and the puff-by-puff release characteristics of HTP aerosols.

If you want to learn more about this compound(5-Methylfuran-2(3H)-one)Electric Literature of C5H6O2, you may wish to communicate with the author of the article,or consult the relevant literature related to this compound(591-12-8).

Reference:
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

The preparation of ester heterocycles mostly uses heteroatoms as nucleophilic sites, which are achieved by intramolecular substitution or addition reactions. Compound: 5-Methylfuran-2(3H)-one( cas:591-12-8 ) is researched.Product Details of 591-12-8.Howe, Alexander G. R.; Maunder, Rhodri; Morgan, David J.; Edwards, Jennifer K. published the article 《Rapid microwave-assisted polyol synthesis of TiO2-supported ruthenium catalysts for levulinic acid hydrogenation》 about this compound( cas:591-12-8 ) in Catalysts. Keywords: titania ruthenium catalyst levulinic acid hydrogenation microwaveassisted polyol method. Let’s learn more about this compound (cas:591-12-8).

One wt% Ru/TiO2 catalysts prepared by a one-pot microwave-assisted polyol method have been shown to be highly active for Levulinic acid hydrogenation to γ-Valerolactone. Preparation temperature, microwave irradiation time and choice of Ru precursor were found to have a significant effect on catalyst activity. In the case of Ru(acac)3-derived catalysts, increasing temperature and longer irradiation times increased catalyst activity to a maximum LA conversion of 69%. Conversely, for catalysts prepared using RuCl3, shorter preparation times and lower temperatures yielded more active catalysts, with a maximum LA conversion of 67%. Catalysts prepared using either precursor were found to contain highly dispersed nanoparticles <3 nm in diameter XPS anal. of the most and least active catalysts shows that the catalyst surface is covered in a layer of insoluble carbon with surface concentrations exceeding 40% in some cases. This can be attributed to the formation of large condensation oligomers from the reaction between the solvent, ethylene glycol and its oxidation products, as evidenced by the presence of C-O and C = O functionality on the catalyst surface. If you want to learn more about this compound(5-Methylfuran-2(3H)-one)Product Details of 591-12-8, you may wish to communicate with the author of the article,or consult the relevant literature related to this compound(591-12-8).

Reference:
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

In general, if the atoms that make up the ring contain heteroatoms, such rings become heterocycles, and organic compounds containing heterocycles are called heterocyclic compounds. An article called Biosynthesis of Pseudomonas-Derived Butenolides, published in 2020, which mentions a compound: 591-12-8, Name is 5-Methylfuran-2(3H)-one, Molecular C5H6O2, Safety of 5-Methylfuran-2(3H)-one.

Butenolides are well-known signaling mols. in Gram-pos. bacteria. Here, we describe a novel class of butenolides isolated from a Gram-neg. Pseudomonas strain, the styrolides. Structure elucidation was aided by the total synthesis of styrolide A. Transposon mutagenesis enabled us to identify the styrolide biosynthetic gene cluster, and by using a homol. search, we discovered the related and previously unknown acaterin biosynthetic gene cluster in another Pseudomonas species. Mutagenesis, heterologous expression, and identification of key shunt and intermediate products were crucial to propose a biosynthetic pathway for both Pseudomonas-derived butenolides. The Whole Genome Shotgun project for P. fluorescens HKI0874 has been deposited at DDBJ/ENA/GenBank under the accession VCNJ00000000.

If you want to learn more about this compound(5-Methylfuran-2(3H)-one)Safety of 5-Methylfuran-2(3H)-one, you may wish to communicate with the author of the article,or consult the relevant literature related to this compound(591-12-8).

Reference:
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Serwa, Remigiusz; Nam, Tae-gyu; Valgimigli, Luca; Culbertson, Sean; Rector, Christopher L.; Jeong, Byeong-Seon; Pratt, Derek A.; Porter, Ned A. published the article 《Preparation and Investigation of Vitamin B6-Derived Aminopyridinol Antioxidants》. Keywords: aminopyridinol preparation antioxidant.They researched the compound: 5-(hydroxymethyl)-2,4-dimethylpyridin-3-ol hydrochloride( cas:148-51-6 ).Quality Control of 5-(hydroxymethyl)-2,4-dimethylpyridin-3-ol hydrochloride. Aromatic heterocyclic compounds can be divided into two categories: single heterocyclic and fused heterocyclic. In addition, there is a lot of other information about this compound (cas:148-51-6) here.

3-Pyridinols bearing amine substitution para to the hydroxylic moiety have previously been shown to inhibit lipid peroxidation more effectively than typical phenolic antioxidants, for example, α-tocopherol. We report here high-yielding, large-scale syntheses of mono- and bicyclic aminopyridinols from pyridoxine hydrochloride (i.e., vitamin B6). This approach provides straightforward, scaleable access to novel, potent, mol. scaffolds whose antioxidant properties have been investigated in homogeneous solutions and in liposomal vesicles. These mol. aggregates mimic cell membranes that are the targets of oxidative damage in vivo.

If you want to learn more about this compound(5-(hydroxymethyl)-2,4-dimethylpyridin-3-ol hydrochloride)Quality Control of 5-(hydroxymethyl)-2,4-dimethylpyridin-3-ol hydrochloride, you may wish to communicate with the author of the article,or consult the relevant literature related to this compound(148-51-6).

Reference:
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

In general, if the atoms that make up the ring contain heteroatoms, such rings become heterocycles, and organic compounds containing heterocycles are called heterocyclic compounds. An article called Aminoalkylphenols as antimalarials. II. (Heterocyclic amino)-α-amino-ο-cresols. The synthesis of camoquin, published in 1948, which mentions a compound: 18436-73-2, Name is 4-Chloro-8-methylquinoline, Molecular C10H8ClN, SDS of cas: 18436-73-2.

In view of the high antimalarial activity of certain substituted α-amino-ο-cresols, earlier work (C.A. 41, 414d) has been extended to analogs containing heterocyclic nuclei. This reports the preparation of a group of 122 (heterocyclic amino)-α-amino-ο-cresols and a related group of 12 (heterocyclic amino)benzylamines, as well as the new intermediates used therein. This work has resulted in the preparation of a promising antimalarial (SN 10,751) named camoquin, as well as other compounds which are the most active 4-aminoquinoline derivatives heretofore reported in trophozoite-induced Plasmodium gallinaceum infection in the chick. Catalytic reduction of the appropriate nitrophenol in the presence of Ac2O gave these 4-acetamidophenols: 2-Cl, m. 144°, 55% yield; 2-Ph, m. 160°, 60%; and 2-acetamidophenols: 4-Cl, m. 186°, 52%; 4-Ph, m. 165°, 89%; and 4-tert-Bu, m. 170°, 79%. 2-Allyl-4-acetamidophenol, m. 93-4°, was obtained in 83% yield from the rearrangement of 4-CH2:CHCH2OC6H4NHAc. The Mannich reaction on the substituted acetamidophenols gave these 4-acetamido-α-substituted-ο-cresols: diethylamino (I), m. 135°, 82%; dibutylamino, m. 73°, 87% (picrate, m. 183-5°); dibenzylamino, m. 230°, 75%; (2-methyl-1-piperidyl) (HCl.H2O, m. 175°, 65%); 4-morpholinyl, m. 133°, 27%; [methyl(2-hydroxyethyl)amino] (HCl, m. 198°, 50%); (2-butylamino), m. 156°, 37%; (2-hydroxyethylamino) (HCl, m. 230°, 31%); the 6-allyl derivative of I, m. 86°, 58%: the 5-acetamido isomer of I (HCl, m. 210°, 33%); and these 6-acetamido-α-diethylamino-4-substituted-ο-cresols: Cl (HCl, m. 212°, 66%); tert-Bu (HCl, m. 158°, 53%); and Ph (HCl, m. 183°). Acid hydrolysis of the appropriate 4-acetamido compound gave these 4-amino-α-substituted-ο-cresols (di-HCl salts) (all m. with decomposition); diethylamino, SN 12,458, m. 218-20°, 96%; 1-piperidyl, m. 153-5°, 91%; and 4-morpholinyl, m. 259-60°, 45%. The Mannich reaction on 4-nitrophenol (A) and the reaction of the amine on 2-(chloromethyl)-4-nitrophenol (B) were used to prepare these α-substituted-4-nitro-ο-cresol HCl salts (all m. with decomposition): diethylamino, A, m. 224°, 40%; diisopropylamino, B, m. 193°, 19%; dibutylamino, B, m. 176°, 75%; diisobutylamino (free base), B, m. 113°, 43%; diisoamylamino, B, m. 132°, 32%; isopropylamino, B, m. 238°, 38%; isobutylamino, B, m. 247°, 29%; tertbutylamino, B, m. 275°, 20%; 1-piperidyl, A, m. 260°, 68%; and α-diethylamino-4-nitro-6-phenyl-ο-cresol, A, m. 125°, 21%; and 4-tert-butyl-α-diethylamino-6-nitro-ο-cresol, A, m. 103°, 50%. The method of Price and Roberts (C.A. 40, 5739.5) was used to prepare these substituted 4-chloroquinolines: 6-Me, m. 55°, 50%; 6-anilino, m. 148°, 6%; 7-EtO, m. 76°, 53%; 7-hexyloxy, a high-boiling liquid, 41%; 8-Me, m. 99°, 71%; 5,7-di-Me, m. 59°, 51%; 5,8-di-Me, m. 51°, 59%; 5-chloro-8-methoxy, m. 127°, 6%; 5-methyl-8-methoxy, m. 78°, 45%; 6,8-di-Me, m. 90°, 82%; and 6,7,8-trichloro, m. 156°, 39%. The (heterocyclic amino)-α-alkylamino-ο-cresols were prepared by minor variations of the general procedure of heating the chloroheterocycle with the amino-α-alkylamino-ο-cresols in aqueous or alc. solution on the steam bath. The latter were obtained either by acid hydrolysis of the acetamido derivatives or by catalytic reduction of the nitro derivatives and were usually condensed without isolation. The products are isolated either as the free bases or HCl salts. All the quinine equivalents (Q) reported here are based on the B4 test using P. gallinaceum in the chick. Nearly all the HCl salts m. with decomposition and are colored yellow to orange. 4-(4-Quinolylamino)-α-diethylamino-ο-cresol (II) di-HCl, SN 12,452, m. above 300°, was obtained in 48% yield and had a quinine equivalent of 3 (designated hereafter in the form Q 3). Analogs of II, substituted on the quinoline nucleus: 2-Cl (2HCl, SN 11,986, m. 248°, 30%, Q <0.07); 3-Ph, SN 11,631, m. 155°, 31%, Q 0.4; 6-MeO (2HCl, SN 10,274, m. 270°, 75%, Q 8); 6-Cl (HCl.0.5H2O, SN 11,597, m. 220°, 60%, Q 3.0); 6-Me, SN 11,559, m. 172° (2HCl, m. 238°, 56%, Q 4); 6-anilino (2HCl.H2O, SN 12,361, m. 196°, 63%, Q 0.2); 6-dimethylamino (3HCl.0.5H2O, SN 11,984, m. 235°, 73%, Q 2.5); 6-nitro (2HCl.1.5H2O, m. 210°, 63%, Q 0.8); 7-MeO (2HCl.0.5H2O, SN 11,554, m. 210°, 43%, Q 7); 7-EtO (2HCl.2H2O, SN 11,281, m. 136°, 44%, Q 7); (7-hexyloxy, SN 11,634, m. 153°, 35%, Q 0.5; Q 7); 7-Me (2HCl, SN 12,699, m. 245°, 93%, Q 9); 7-Cl (camoquin) SN 10,751, m. 208°, 86%, Q 25 (2HCl.0.5H2O, m. 243°); 2HCl.H2O, m. 183°; (2HCl.2H2O, m. 160°, 90%); 8-Cl, SN 11,551, m. 212° (2HCl.0.5H2O, m. 253°, 79%, Q 0.5); 8-MeO (2HCl.1.5H2O, SN 11,594, m. 241°, 50%, Q 0.8); 8-Me (2HCl.H2O, SN 11,601, m. 253°, 66%, Q 0.7); 5-chloro-3-Me (2HCl, SN 11,985, m. 258°, 48%, Q 0.3); 5,7-di-Cl (2HCl, SN 12,700, m. 200°, 65%, Q 3); 5,7-di-Me (2HCl, SN 11,561, m. 242°, 67%, Q 10); 5,8-di-Cl (2HCl.H2O, SN 11,596, m. 235°, 60%, Q 0.25); 5,8-di-Me (2HCl, SN 11,560, m. 249°, 80%, Q 0.6); 5-chloro-8-methoxy [2HCl, SN 12,162,(incorrectly given as 12,161 in original), m. 231°, 80%, Q 0.4]; 6-methoxy-2-Me (2HCl, SN 9223, m. 278°, 45%, Q 1.2); 6-methoxy-2-Ph (2HCl.1.75H2O, SN 11,592, m. 198°, 61%, Q 0.25); 6,7-di-Cl (2HCl, SN 12,161, m. 257°, 71.5%, Q 5); 6,7-di-MeO (2HCl, SN 13,395, m. 258°, 68%, Q 2.5); 6,7-di-Me, SN 11,990, m. 215°, 49%, Q 6; 6,8-di-Me (2HCl.H2O, SN 11,558, m. 264°, 54%, Q 0.6); 7-chloro-2-Ph (2HCl, SN 11,232, m. 260°, 41%, Q 0.3); 7-chloro-3-Ph, SN 12,228, m. 165°, Q 1; 7-chloro-3-Me (2HCl, SN 10,492, m. 260°, 64%, Q 6); 8-methoxy-5-Me (2HCl, SN 11,632, m. 210°, 90%, Q 0.6); 6,7,8-tri-Cl (2HCl, SN 11,633, m. 277°, 40%, Q <0.3); and 6-HO (2HCl, SN 11,563, m. 262°, 64%, Q 0.2) (prepared by HBr demethylation of the 6-MeO derivative). 4-(6-Methoxy-4-quinolylamino)-α-dibutylamino-ο-cresol (III) (2HCl.1.25H2O, m. 193°, 10%, Q 9); the (7-chloro-3-methyl-4-quinolylamino) analog of III (2HCl.1.5H2O, m. 177°, 43%, Q 10). 4-(6-Methoxy-4-quinolylamino)-α-1-piperidyl-ο-cresol (IV) (2HCl.0.5H2O, SN 12,038, m. 270°, 80%, Q 8); analogs of IV: (6,7-dimethoxy-4-quinolylamino) (2HCl, SN 13,413, m. 230°, 40%, Q 4); (7-chloro-3-methyl-4-quinolylamino) (2HCl, SN 12,360, m. 270°, 47%, Q 2); (6-methyl-4-quinolylamino) (2HCl, SN 12,456, m. 240°, 41%, Q 2.5). 4-(6-Methoxy-4-quinolylamino)-α-4-morpholinyl-ο-cresol (V) (2HCl, SN 11,989, m. 265°, 57%, Q 1); analogs of V: (7-chloro-3-methyl-4-quinolylamino) (2HCl, SN 12,362, m. 242°, 33%, Q 0.15); (6-methyl-4-quinolylamino), SN 12,457, m. 239°, 50%, Q 0.8. 5-(7-Chloro-4-quinolylamino)-α-diethylamino-ο-cresol, SN 13,730, m. 173°, Q 9; 6-(7-chloro-4-quinolylamino)-α-diethylamino-4-(diethylaminomethyl)-ο-cresol-1.5H2O, m. 145°, Q 5; 4-chloro-α-diethylamino-6-(6-methoxy-4-quinolylamino)-ο-cresol (2HCl, SN 12,885, m 205°, 50%, Q 0.5). 6-Chloro-4-(7-chloro-4-quinolylamino)-α-diethylamino-ο-cresol (VI), SN 13,729, m. 225°, Q 12; analogs of VI: 6-Ph (0.5H2O, m. 235°, 25%); 6-allyl, SN 11,991, m. 148°, 44%, Q 10; 6-allyl-α-1-piperidyl, SN 12,697, m. 190°, 32%, Q 4; 6-allyl-α-diallylamino, SN 13,394, m. 131°, 25%, Q 0.7. 6-Allyl-α-diethylamino-4-(6-methoxy-4-quinolylamino)-ο-cresol, SN 12,039, m. 161°, 33%, Q 7. Variations of the alkylamino group on the cresol portion of camoquin were studied: α-amino-4-(7-chloro-4-quinolylamino)-ο-cresol (VII) (2HCl.0.5H2O, SN 1603, m. 325°, 80%, Q 6); analogs of VII (substituents on the α-amino group): benzoyl (HCl, SN. 11,557, m. 289°, 80%, Q 0.15); Et (2HCl, m. 280°, Q 40, 4% conversion, prepared by the Mannich reaction of EtNH2, (HCHO)x, and 7-chloro-4-(4-hydroxyanilino)quinoline (HCl, m. above 320°, 94%)); Pr(2HCl.0.5H2O, m. 244°, 24%, Q 30); iso-Pr (2HCl, m. 287° 50%, Q 40); Bu (2HCl, m. 254°, 6%, Q 30); sec-Bu (2HCl.H2O, m. 252°, 3%, Q 50); iso-Bu (2HCl, m. 256°, 65%, Q 75); tert-Bu (2HCl, m. 285°, 36%, Q 40); Am (2HCl, m. 266°, 15%, Q 50); (1-methylbutyl 2HCl, m. 231°, 22%, Q 40); iso-Am (2HCl, m. 279°, 20%, Q 50); hexyl (2HCl, m. 280°, 56%, Q 25); (2-ethylbutyl (2HCl, m. 263°, 15%, Q 50)); heptyl (2HCl, m. 278°, 29%, Q 15); octyl, m. 150°, 15%, Q 2.5; allyl (2HCl, m. 257°, 3%, Q 20); 1-methylallyl (2HCl.1.75H2O, m. 95°); cyclohexyl (2HCl.0.25H2O, m. 252°, 30%, Q 30); 2-hydroxyethyl (2HCl.H2O, m. 182°, 15%, Q 3); 2-methoxyethyl (2HCl, m. 271°, Q 25); benzyl (2HCl, m. 270°, Q 16); (α-methylphenethyl) (2HCl.0.25H2O, m. 243°, 31%, Q 25); di-Me (2HCl, m. 290°, 85%, Q 6); N-ethyl-N-butyl(2HCl, m. 240°, 65%, Q 30); di-Pr, SN 13,835, m. 181°, 11%, Q 25; di-Bu, SN 14,105, m. 164°, 20%, Q 35; diiso-Bu (0.5H2O, m. 166°, 38%); diiso-Am (0.5H2O, m. 135°); dihexyl (2HCl, m. 220°, 40%, Q 0.5); diheptyl (2HCl, m. 203°, 52%, Q 1); dioctyl (2HCl, m. 192°, 46%, Q 0.2); bis(2-ethylhexyl) (2HCl.H2O, m. 154°, 1%, Q 3); methyl(2-hydroxyethyl) (2HCl, SN 12,363, m. 250°, 63%, Q 3); butyl(2-hydroxyethyl), SN 14,824, m. 149°, 22%, Q 12; bis(2-hydroxyethyl), m. 193°, 25%, Q 0.6; dibenzyl (2HCl, m. 235°, 74%, Q 2.5); N-methyl-N-Ph (H2O, m. 140°, 39%, Q 0.07); N-ethyl-N-Ph, m. 131°, 54%, Q <0.05. Further analogs of VII: α-1-piperidyl (2HCl.2.5H2O, SN 11,636, m. 302°, 77.5%, Q 25); α-(2-methyl-1-piperidyl) (2HCl, SN 12,357, m. 288°, 66%, Q 20); α-4-morpholinyl (2HCl, SN 11,987, m. 292°, 60-5%, Q 4). Compounds containing heterocyclic nuclei other than the 4-quinolyl include the following 4-(heterocyclic amino)-α-diethylamino-ο-cresols: 9-acridyl (2HCl, SN 12,356, m. 265°, 45%, Q 1.5); (3-chloro-9-acridyl) (2HCl, SN 12,355, m. 267°, 52%, Q 3); (4-methoxy-9-acridyl) (2HCl, SN 12,164, m. 245°, 50%, Q 0.15); (3-chloro-5-methyl-9-acridyl) (2HCl, SN 11,988, m. 275°, 40%, Q 0.25); 2-quinolyl (2HCl, SN 9559, m. 230°, 48%, Q 0.12); (6-methoxy-2-quinolyl) (2HCl, SN 11,537, m. 237°, 20.5%, Q 0.7); (5-nitro-2-quinolyl) (2HCl, SN 9307, m. 245°, 33%, Q <0.07); (2-amino-4-pyrimidyl) (2HCl, SN 9591, m. 258°, 41%, Q 1.1); [2-(1-piperidyl)-4-pyrimidyl], SN 10,177, m. 156°, 31%, Q 0.4; (2-amino-6-methyl-4-pyrimidyl) (2HCl, m. 245°, 55%); (4-methoxy-2-benzothiazolyl) (2HCl, SN 11,189, m. 163°, 47%, Q <0.07); (6-chloro-2-methoxy-9-acridyl) (VIII), SN 8617, m. 175°, 50% (H2O, m. 117°; 2HCl, m. 280°, 76%, Q 4; 2HCl.2H2O, m. 180°); analogs of VIII: α-(ethylbutylamino) (2HCl, m. 252°, 36%, Q 5); α-dibutylamino (2HCl, SN 11,599, m. 246°, 69%, Q 2.5); α-diallylamino, SN 13,163, m. 158°, 16%, Q 0.5; α-dihexylamino (2HCl, m. 254°, 23%, Q 0.4); α-dioctylamino (2HCl, m. 285°, 20%, Q <0.06); α-1-piperidylamino (2HCl, SN 11,536, m. 287°, Q 0.6); α-hexylamino (2HCl.H2O, m. 226°, 7%, Q 1); α-(2-hydroxyethylamino) (2HCl.H2O, SN 11,233, m. 284°, 90%, Q 0.2); α-benzamido (HCl.0.5H2O, SN 11,589, m. 294°, 95%, Q <0.04). 5-(6-Chloro-2-methoxy-9-acridylamino)-α-diethylamino-ο-cresol (2HCl.0.5H2O, SN 9614, m. 237°, 50%, Q 1); 4-tert-butyl-6-(6-chloro-2-methoxy-9-acridylamino)-α-diethylamino-ο-cresol (IX) (2HCl, SN 11,544, m. 271°, 98%, Q 0.6); 4-Ph analog of IX (2HCl, SN 11,553, m. 274°, 84%, Q 0.5); 4-diethylaminomethyl analog of IX (3HCl.H2O, SN 11,550, m. 257°, 73%, Q 2); 6-allyl-4-(6-chloro-2-methoxy-9-acridylamino)-α-diethylaminο-ο-cresol (X) (2HCl, SN 11,234, m. 233°, 65%, Q 3); α-diallylamino analog of X (2HCl.H2O, SN 13,399, m. 188°, 12%, Q 0.3); and α-1-piperidyl analog of X, SN 12,701, m. 164°, 44%, Q 2. A series of nitrobenzylamines was prepared by condensation of the nitrobenzyl chloride with the amine in absolute EtOH. During the course of this work, 2-(chloromethyl)-4-nitrophenetole,m. 72-5°, was obtained in 75% yield from the chloromethylation of 4-nitrophenetole. The nitrobenzylamines were reduced catalytically in absolute EtOH and the resulting aminobenzylamines without isolation were condensed with the chloroheterocycle. Thus were obtained: N,N-diethyl-3-nitrobenzylamine, b6 145-8°, 60%; 4-nitro isomer (XI) (HCl, m. 162°, 45%); analogs of XI: N,N-di-Pr (HCl, m. 138°, 68%); N-monoisopropyl (HCl, m. 232°, 82%); N-monoisobutyl (HCl, m. 214°, 64%). N,N-Diethyl-5-nitro-2-methoxybenzylamine (XII) (HCl, m. 178°, 72%); analogs of XII: N-monoisobutyl (HCl, m. 176°, 63%); N-monoamyl (HCl salt could not be separated from an impurity of AmNH2.HCl). N,N-Diethyl-5-nitro-2-ethoxybenzylamine (HCl, m. 182°, 56%). 3-(7-Chloro-4-quinolylamino)-N,N-diethylbenzylamine (2HCl.2H2O, SN 11,590, m. 128° (all these HCl salts m. with decomposition), 85%, Q 1); 4-(7-chloro-4-quinolylamino)-N,N-diethylbenzylamine (XIII) (2HCl, SN 12,455, m. 261°, Q 4); N,N-di-Pr analog of XIII (2HCl, m. 255°, 60%, Q 4); the N-monoisopropyl analog of XIII (2HCl salt, m. 303°, 23%, Q 10); N-monoisobutyl analog of XIII (2HCl.H2O, m. 288°, 76%); 5-(7-chloro-4-quinolylamino)-N,N-diethyl-2-methoxybenzylamine (XIV), m. 203°, 64%, Q 25; N-monoisobutyl analog of XIV (2HCl.0.25H2O, m. 194°, 76%, Q 17); N-monoamyl analog of XIV (2HCl, m. 288°, 42%, Q 15); 2-ethoxy analog of XIV (2HCl.2H2O, m. 247°, 73%, Q 8); 3-(6-chloro-2-methoxy-9-acridylamino)-N,N-diethylbenzylamine (XV) (2HCl.0.75H2O, SN 10,984, m. 278°, 55%, Q 0.5); the 4-substituted benzyl isomer of XV (2HCl.0.5H2O, SN 10,028, m. 260°, 92%, Q 0.4); and 5-(6-chloro-2-methoxy-9-acridylamino)-2-methoxy-N,N-diethylbenzylamine (2HCl.0.5H2O, m. 212°, 67%, Q 3). 6-Chloro-9-(4-hydroxyanilino)-2-methoxyacridine, m. 266° (decomposition) (HCl, orange, m. above 300°, prepared in 98% yield from p-NH2C6H4OH and 6,9-dichloro-2-methoxyacridine on the steam bath), failed to undergo the usual Mannich reaction. Failure of this reaction led to the development of the method of synthesis used for all of the heterocyclic derivatives reported in this paper. If you want to learn more about this compound(4-Chloro-8-methylquinoline)SDS of cas: 18436-73-2, you may wish to communicate with the author of the article,or consult the relevant literature related to this compound(18436-73-2).

Reference:
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

The reaction of an aromatic heterocycle with a proton is called a protonation. One of articles about this theory is 《Synthesis of 2,4-dimethyl-3-hydroxy-5-hydroxymethylpyridine》. Authors are Balyakina, M. V.; Rubtsov, I. A.; Zhdanovich, E. S.; Preobrazhenskii, N. A..The article about the compound:5-(hydroxymethyl)-2,4-dimethylpyridin-3-ol hydrochloridecas:148-51-6,SMILESS:OC1=C(C)C(CO)=CN=C1C.[H]Cl).Reference of 5-(hydroxymethyl)-2,4-dimethylpyridin-3-ol hydrochloride. Through the article, more information about this compound (cas:148-51-6) is conveyed.

2,4-Dimethyl- 3 – hydroxy-5- hydroxymethylpyridine (4- deoxypyridoxine) (I) was synthesized via the following intermediates: 2,4-dimethyl-5-cyano-6-pyridone (II), 2,4-dimethyl-3-nitro-5-cyano-6-pyridone (III), and 2,4-dimethyl-3-nitro-5-cyano-6-chloropyridine (IV). Reduction of IV was carried out in 1 step in dilute HCl over Pd-C. 2,4-Dimethyl-3-amino-5-aminomethylpyridine was converted without isolation to I by treatment with NaNO2. Thus, 33 ml. NH4OH (d20 0.9) was added with stirring to 40 g. EtO2CCH2CN, the mixture cooled with ice to 0-2° and the precipitate filtered off, washed at 0° with 20 ml. cold EtOH, and dried to yield 23.8 g. cyanoacetamide (V), m. 120-2°. The filtrate was evaporated to dryness to yield an addnl. 3.95 g. Acetylacetone (10.0 g.) was added at 70° to 8.4 g. V in 50 ml. MeOH and 1.12 ml. Me2NH to precipitate 88.1% II, m. 293.1-4.2°. A suspension of 4.44 g. II in 15 ml. Ac2O is treated with stirring with 2.3 ml. HNO3 (d20 1.4) and 2.3 ml. Ac2O at 35-40°, and the mixture stirred 2 hrs. at 18-20° and poured upon 23 g. crushed ice, to precipitate 56.4% yellow III, m. 272.0-2.6° (alc.). P2O5 (5.3 g.) is added to a suspension of 3.6 g. III in 36 ml. PhCl, the mixture heated with stirring 3 hrs. at 118-120° the solvent removed at 45-50°/10 mm., the residue treated with 3.6 ml. absolute alc., stirred, and left 8 hrs. at 0-4°, the precipitate filtered off, washed at 0° with 2 ml. alc., and dried, and the residue extracted with petr. ether (b. 60-70°) to give 62.2% yellow IV, m. 114-15°. IV (2.4 g.) in 25 ml. ice water was added to a pre-hydrogenated mixture of 0.10 g. PdCl2 with H2O, HCl, and C, the hydrogenation continued until the theoretical H absorption, the catalyst separated and washed with 2 ml. H2O, 2.4 ml. HCl (d20 1.18) added to the solution and washings, and the solution heated 1.5 hrs. at 80-5° during which 1.6 g. NaNO2 in 5 ml. H2O was added, the heating continued 30 more min. (neg. starch-iodide test), the solution evaporated in vacuo, the residue extracted with absolute alc., the extracts treated with activated C and concentrated until the appearance of crystals, the mixture kept 8 hrs. at 0-4°, and the precipitate filtered off, washed at 0° with 1 ml. alc., and dried to give 42.2% I, m. 256.1-7.2°.

If you want to learn more about this compound(5-(hydroxymethyl)-2,4-dimethylpyridin-3-ol hydrochloride)Reference of 5-(hydroxymethyl)-2,4-dimethylpyridin-3-ol hydrochloride, you may wish to communicate with the author of the article,or consult the relevant literature related to this compound(148-51-6).

Reference:
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Epoxy compounds usually have stronger nucleophilic ability, because the alkyl group on the oxygen atom makes the bond angle smaller, which makes the lone pair of electrons react more dissimilarly with the electron-deficient system. Compound: 5-Methylfuran-2(3H)-one, is researched, Molecular C5H6O2, CAS is 591-12-8, about Characterization of key aroma-active compounds in four commercial oyster sauce by SGC/GC x GC-O-MS, AEDA, and OAV.Safety of 5-Methylfuran-2(3H)-one.

Oyster sauce (OS) is a common seasoning in Asian countries. Here, four types of OS with different components and ingredients were characterized by the switchable GC/GC x GC-olfactometry-mass spectrometry (SGC/GC x GC-O-MS) and sensory evaluation. A total of 27 key aroma-active compounds were screened by FD factor and OAVs in OS. Of them, pyrazines were predominated, 2,5-dimethyl-3-ethylpyrazine had the highest OAV and FD factor. Sensory evaluation showed that the overall flavor profile of OS is primarily composed of nutty/roast, caramel/sweet, cooked potato-like, fruity, burnt, and unpleasant notes such as rancid, mushroom-like, and fishy. Moreover, soy sauce exhibited a great impact on OS aroma. The principal component anal. (PCA) results based on the OAV values of key aroma-active compounds were consistent with the sensory evaluation results, suggesting that PCA based on the above method could accurately cluster and distinguish the samples with different aroma profiles. The odor notes of burnt, fruity and caramel-like/sweet contributed to WDM and JC clustering. Similarly, roast/nutty, cooked potato-like, and unpleasant odor notes contributed to clustering of LKK and HT.

If you want to learn more about this compound(5-Methylfuran-2(3H)-one)Safety of 5-Methylfuran-2(3H)-one, you may wish to communicate with the author of the article,or consult the relevant literature related to this compound(591-12-8).

Reference:
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Recommanded Product: 5-Methylfuran-2(3H)-one. Aromatic compounds can be divided into two categories: single heterocycles and fused heterocycles. Compound: 5-Methylfuran-2(3H)-one, is researched, Molecular C5H6O2, CAS is 591-12-8, about Rapid microwave-assisted polyol synthesis of TiO2-supported ruthenium catalysts for levulinic acid hydrogenation. Author is Howe, Alexander G. R.; Maunder, Rhodri; Morgan, David J.; Edwards, Jennifer K..

One wt% Ru/TiO2 catalysts prepared by a one-pot microwave-assisted polyol method have been shown to be highly active for Levulinic acid hydrogenation to γ-Valerolactone. Preparation temperature, microwave irradiation time and choice of Ru precursor were found to have a significant effect on catalyst activity. In the case of Ru(acac)3-derived catalysts, increasing temperature and longer irradiation times increased catalyst activity to a maximum LA conversion of 69%. Conversely, for catalysts prepared using RuCl3, shorter preparation times and lower temperatures yielded more active catalysts, with a maximum LA conversion of 67%. Catalysts prepared using either precursor were found to contain highly dispersed nanoparticles <3 nm in diameter XPS anal. of the most and least active catalysts shows that the catalyst surface is covered in a layer of insoluble carbon with surface concentrations exceeding 40% in some cases. This can be attributed to the formation of large condensation oligomers from the reaction between the solvent, ethylene glycol and its oxidation products, as evidenced by the presence of C-O and C = O functionality on the catalyst surface. If you want to learn more about this compound(5-Methylfuran-2(3H)-one)Recommanded Product: 5-Methylfuran-2(3H)-one, you may wish to communicate with the author of the article,or consult the relevant literature related to this compound(591-12-8).

Reference:
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

The reaction of an aromatic heterocycle with a proton is called a protonation. One of articles about this theory is 《Compounds affecting fertility in adult houseflies》. Authors are LaBrecque, G. C.; Gouck, H. K..The article about the compound:5-(hydroxymethyl)-2,4-dimethylpyridin-3-ol hydrochloridecas:148-51-6,SMILESS:OC1=C(C)C(CO)=CN=C1C.[H]Cl).Quality Control of 5-(hydroxymethyl)-2,4-dimethylpyridin-3-ol hydrochloride. Through the article, more information about this compound (cas:148-51-6) is conveyed.

Of 1100 compounds that were tested, 20 caused sterility in adult Musca domestica when given in the food. P,P-Bis(1-aziridinyl)-N-(p-methoxyphenyl)phosphinic amide, 5-fluoroorotic acid, and 1,4-piperazinediylbis[bis(1-aziridinyl)phosphinic oxide] induced sterility without apparent toxic effect over the broadest range of concentrations, from 5% to 0.1% or 0.25%.

If you want to learn more about this compound(5-(hydroxymethyl)-2,4-dimethylpyridin-3-ol hydrochloride)Quality Control of 5-(hydroxymethyl)-2,4-dimethylpyridin-3-ol hydrochloride, you may wish to communicate with the author of the article,or consult the relevant literature related to this compound(148-51-6).

Reference:
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia